Originally Posted by
Mark
This is apparently the reset procedure
Ensure filler flap is closed, and ignition is in position 0
You have 60 seconds to complete stage 1 of the procedure, beggining when ignition is turned to position II
Stage 1
Turn ignition to position II
open fuel flap, close fuel flap
open fuel flap, close fuel flap
Turn ignition to position 0
Turn ignition to position II
Stage 2 must be started within 60 seconds of igition being turned to position II in Stage 1
Stage 2
You have 10 seconds to complete the following
open fuel flap, close fuel flap
open fuel flap, close fuel flap
open fuel flap, close fuel flap
For Stage 3, wait a minimum of 15 seconds.. but no more than 30 seconds, anything over 30 seconds and you have to start again.. the window is 15-30 seconds.
Stage 3
You have 10 seconds to complete the following
open fuel flap, close fuel flap
open fuel flap, close fuel flap
open fuel flap, close fuel flap
Stage 4
Start engine, and run at idle for minimum of 20 seconds
After 25 seconds, MIL or PCL light should illuminate, or message displayed on instrument cluster to indicate reset has been achieved
Turn off engine, and move ignition to position 0
Turn ignition to position II, no message, PCL/MIL light should no longer be illuminated
If either are illuminated or message still displayed, try procedure again.