Car
RB26 S13 BAD SX
Power-related mods
RB26, 800cc sards, gt35r, apexi d-jetro, etc
Boost
1.4 bar
RR Results
509 BHP
Name of Rolling Road
surrey rolling road
Car
RB26 S13 BAD SX
Power-related mods
RB26, 800cc sards, gt35r, apexi d-jetro, etc
Boost
1.4 bar
RR Results
509 BHP
Name of Rolling Road
surrey rolling road
nistune
gt28r @ 1.2 bar
V-mount intercooler
exhaust cam @ inlet +adjustable cam pully's
SS manifold
ported head+ polished valves
rb25 maf
custom 3 inch to 2.75 turboback
4.5 litre carter
h-beam conrods
Car
RS13 CA18DET
Power-related mods
Garrett GT2871R 52T 0.64A/R, JE 8:1 forged pistons, Cryogenically treated rods and crank, Greddy 1.2mm metal head gasket, Ported & Polished head , CA16DE Inlet Cam, Apexi Power FC (mapped by APT), 660cc Denso Injectors, French Weapon Manifold, Z32 AFM, Greddy Profec B SpecII, HKS ‘S’ spec Front Mount Intercooler, NGK BPR8ES Spark Plugs, Apex Dump Pipe, SE-Nissan 64mm Down Pipe, HKS Hiper Muffler Exhaust.
Boost
1.6bar peak drops to 1.5bar
RR Results
Boost and whp
A happy torque curve and fhp.
Name of RR
APT in Norwich.
Could squeeze a bit more out of it at the top end but it did this on the dyno so I dont think I'll bother.
I'm NOT the Chairman anymore, Ken was. He still likes poo though. Its not Jim either now. Ooh ooh, its now Doc!
Blue '89 S13, 362 bhp, slowly getting more battered. Spec
Opie Oils : MOT-a-Car : DriftWorks
Car
S13 CA18DET/CA20DET
Power-related mods
Garrett GT2871R 52T 0.64A/R, Tomie stroker crank and pistons, Crower rods, Greddy 1.6mm metal head gasket, Ported & Polished head and inlet mani, Apexi Power FC pro (mapped by APT), 560cc evo Injectors, French Weapon Manifold, Z32 AFM, PFC boost controller, XS power intercooler as custom Vee mount, Koyo Rad, NGK BCPR7ES Spark Plugs, Apex Dump Pipe, Apex exhaust.
Boost
1.6bar
RR Results
377bhp @fly at APT in Norwich
Then after a couple of airflow adjustments
390bhp@fly, 356@wheels at Dastek in D***ety bay
Member no. 31 Project Purplyness
CA19.5DET 390BHP
Updated, 396@wheels, same spec as before (378@wheels, 441 fly) but with a different ECU, a couple of PSI more and a bit of cam timing adjustment.
What boost was that at Jezz?
2.1bar.
SR20DET engine
3" exhaust and downpipe
Tubular Manifold
Air Filter
FMIC
Jez Stage1a Chip
18.5 psi peak boost on standard T28
258 BHP @ Wheels
284 BHP @ Flywheel
267 ft/lbs Torque
Transmission losses seem almost non existant lol
Last edited by Baba; 24-04-2009 at 23:16.
Car
1990 S13 CA18DET
Power-related mods
GT28R turbo
444cc injectors
BAILEY Dump Valve
Driftworks lightweight flywheel
Exedy s-type Paddle Clutch
Stage 1 chiped ECU
K&N Intake filter
3 inch Mongoos system turbo back and 6 inch rear silencer
Saab front mount I/C
walbro fuel pump
eletric fan
Boost
12psi
Dyno Results
248.3 bhp
stage 1 chip? u wanna get a more advanced one, i think stage 3 requires a z32 maf and thats the criteria met, dont quote me on that tho
Car
S13 200SX CA18
Power-related mods
Wiesco 1mm oversized Forged Pistons, Pauter Forged conrods, Balanced crank, Lightened/Balanced Flywheel, Carbon/Kevlar Paddle clutch, T28H, Walboro 255lph Fuel pump, norris designs exhasut, apexi induction kit, Z32 AFM, H-dev stage 3 chip, 444's, Apex FMiC
Boost
1.1 bar / 17psi ish
RR Results
273bhp @ 6563rpm
232.9 lb/ft @ 5881rpm
Name of Rolling Road
Track 'N' Road Powerformance Rainham
Dyno Pack Thor Racing[/QUOTE]
lol!
Glad you're still around on here Richie - A little off-topic i know, but hey, it's still power-related! - Can you PM me please Rich? - Need to get me some Klotz, now that I actually have a clutch that'll (apparently) transmit the power!
PS - which clutch are you currently using, and dare I ask how much it costs? - Still unsure about a single clutch, although CC claim that this one I now have will transmit an extra 300%, so hoping that's true...
All the best mate!
Den.
Car
S13, CA18DET
Power-related mods
Garrett T28 S14a + Apex boost valve
Apex braided turbo lines
WilTec Intercooler, Samco hoses & DIY home made alu pipework
K&N air filter
Apex elbow & freeflow exhaust
Horsham Developments Stage 1 chip
Bailey BOV
Walbro fuel pump & 300ZX fuel filter
Boost
0,75 bar/10,87psi
RR Results
220 bhp @ 6300 RPM (flywheel figure)
252 Nm @ 5000RPM
Name of RR
Avtoelektronika Chiptuning, Slovenia (same as Igralec)
http://www.gas-tuning.com/docs/Downl...san200sx-1.pdf
Last edited by Symon; 20-06-2009 at 15:50.
Car
s13 ca18det
Power-related mods
saad intercooler free flow air filter Garrett T28 stage 1 ecu chip
Boost
16 psi
RR Results
216 bhp (flywheel figure)
Car
S13 with SR
Power related mods
H-Dev SR23DET
GT35R turbo
1000cc injectors
Head work
Cams
Solaris S6 ECU
More info here
Results:
Power at 1.7bar:
Power at 1.5 bar:
that a wheel figure or a fly figure jez?
CA18DET
GT2871R 0.64AR
Water Injection
Ambient temp >26deg with not much airflow in the RR garage.
380 bhp @ 6600
330 ft-lb torque @ 4750
Graphs: http://www.sxoc.com/vbb/showthread.p...81#post4790881