Useful threads - Please Check Before Asking a Question

[corfublue]

Where you glue a piece of plastic good thinking bye the way
I tapped the hole out with a 5 mm tap and inserted a 5 mm countersunk screw liquid gasket on screw and job done.The plastic or adhesive cannot deteriorate over time, and no future problems 4 years still good

[WuTan]

http://www.xspeed.com.au/manuals.php

HKS
Apexi
Blitz
Greedy
Turbosmart

[timsub]

S13 auto 3.916 - CA or SR powered...?

S14 man 3.697 - Jap or UK?

s14 auto 3.916 - Jap or UK?

S15 4.083 - Is that NA or Turbo? Auto or Manual?

Does the Jap/UK spec of the car affect which diff the car comes fitted with as standard?

Can anyone confirm the above queries which are in bold?

Cheers

[Mark D]

Mighe be useful:


http://www.driftworks.com/forum/tech...ml#post1996499

[7evil]

I'm looking for a guide to remove everything possible from my engine bay. I would like to have a result like this.

[Mark D]

HID fitting guide seems to be down

In fact the whole Jull site seems to be down

[inliner_04]

Maybe worth adding this, its not s14 specific but its about wideband lambda placement and i found it really useful
http://wbo2.com/lsu/lsuinstal.pdf

[Todd89]

http://www.nicoclub.com/archives/how...0det-head.html

How to build a head with solid lifters and shim guide

[Todd89]

http://www.nicoclub.com/archives/ins...n-sr20det.html

[alex_trimmer]

Will an s13 diff fit a 14a and are the lsd's ? Also my 14a is uk spec, should it have a diff oil cooler as there is not one fitted at present ? Cheers

[Skyline boy]

Wrong thread.

[botcha]

Which differential oil do I purchase for my 200sx s14a auto box on my S reg?


Sent from my iPhone using Tapatalk

[Vigilant teSte]

Diff oil or auto trans fluid?

[botcha]

Diff oil on my auto s14. as the hose from the diff to the cooler is leakin, even though I've clamped 3 strengthened clips to the pipe,, pipe must be worn so going to replace it..
Been told I can block the cooler off as it doesn't really do much? Not sure if this would b okay though


Sent from my iPhone using Tapatalk

[leno]

Diff oil on my auto s14. as the hose from the diff to the cooler is leakin, even though I've clamped 3 strengthened clips to the pipe,, pipe must be worn so going to replace it..
Been told I can block the cooler off as it doesn't really do much? Not sure if this would b okay though


Sent from my iPhone using Tapatalk

Yeah that's fine man! Mines been removed and blocked off for a year or so Inc a drift day.. no issues so far!

[drc]

Done a 2 part video of removing and replacing front wheel bearings and front studs/fitting extended studs on my s14a. May help someone out if you want to make it a sticky, cheers

Part 1

[drc]

Part 2

[markcro]

Nice one on the videos! :-)