Page 1 of 5 123 ... LastLast
Results 1 to 20 of 99

Thread: useful threads

  1. #1
    Rep type thing Kev's Avatar
    Join Date
    Dec 2001
    Location
    Glasgow ish
    Posts
    36,195
    Rides
    0

    useful threads

    list them here.

    Blaggers Guide to S13 Modification
    http://www.sxoc.com/vbb/showthread.php?t=63508

    Library of Power figures
    http://www.sxoc.com/vbb/showthread.php?t=142254

    usefull part no's:-
    http://www.sxoc.com/vbb/showthread.p...rmostat+gasket

    Electronic stuff

    ECU part numbers:-
    http://www.sxoc.com/vbb/showpost.php...81&postcount=8

    dodgy speedo one :-
    http://www.sxoc.com/vbb/showthread.p...618#post343618

    and changing dash lights:-
    http://www.sxoc.com/vbb/showthread.php?t=133048

    colour of wires for stereo:-
    http://www.sxoc.com/vbb/showthread.p...ighlight=color

    ecu diagnostics:-
    http://www.sxoc.co.uk/vbb/showthread.php?t=90347

    fitting an Apexi TT with no harness:-
    http://www.sxoc.com/vbb/showthread.php?t=109145

    Making an e-manage support cable:-
    http://www.sxoc.com/vbb/showthread.php?t=148220

    no pop-up on sidelights:-
    http://www.sxoc.com/vbb/showthread.php?s=&threadid=5781

    and sleepy eyes:-
    http://www.sxoc.com/vbb/showthread.p...threadid=73613

    timing:-
    http://www.sxoc.com/vbb/showthread.p...&highlight=cam
    and
    http://www.sxoc.com/vbb/showthread.php?s=&postid=707106

    General body/suspension stuff
    fuel tank straps:-
    http://www.sxoc.com/vbb/showthread.p...el+tank+straps

    and how to remove fuel tank:-
    http://www.sxoc.com/vbb/showthread.php?t=86999

    Steering rack bushes:-
    http://www.sxoc.com/vbb/showthread.p...t=steering+tip


    Engine/gbox stuff
    starter motor replacement:-
    http://www.sxoc.com/vbb/showthread.p...=starter+motor

    compression testing:-
    http://www.sxoc.com/vbb/showthread.php?t=123058
    leakdown testing:-
    http://www.sxoc.com/vbb/showthread.php?t=103054

    Changing big ends in situ:-
    http://www.sxoc.co.uk/vbb/showpost.p...1&postcount=13
    and another
    http://www.sxoc.com/vbb/showthread.p...53#post4652953

    cambelt replacement:-
    http://www.sxoc.com/vbb/showthread.p...ght=CAS+timing

    engine out:- (a wee bit long winded)
    http://www.sxoc.com/vbb/showthread.php?s=&threadid=3800

    Bearing end cap removal:-
    http://www.sxoc.com/vbb/showthread.php?t=68462

    t3 waterpipes:-
    http://www.sxoc.com/vbb/showthread.p...threadid=54070

    clutch swap:-
    http://www.sxoc.com/vbb/showthread.p...=clutch+change

    fitting LSD:-
    http://www.sxoc.com/vbb/showthread.p...highlight=diff

    Hot start solenoid Bypass:-
    http://www.sxoc.co.uk/vbb/showthread...ight=hot+start
    and
    http://www.sxoc.co.uk/vbb/showthread...ight=hot+start



    Oil pressure and Temperature information. (robbed from S14 Tech but relevant to S13s).
    http://www.sxoc.com/vbb/showthread.php?t=90905

    Basic turbo connections
    http://www.sxoc.com/vbb/showthread.php?t=244277

    Volvo IC install
    http://www.sxoc.com/vbb/showthread.php?t=346195


    Brakes
    paul s13's big brake conversion:-
    http://www.sxoc.com/vbb/showthread.php?t=56219

    Conversions
    auto to manual conversion:-
    http://www.sxoc.com/vbb/showthread.php?t=96711

    SR20 conversion:-
    http://www.sxoc.com/vbb/showthread.php?t=129050

    RB25 DET Engine conversion:-
    http://www.sxoc.co.uk/vbb/showthread.php?t=110234





    Interesting articles
    article on det:-
    http://www.sxoc.com/vbb/showthread.php?s=&threadid=5274

    gearing info:-
    http://www.sxoc.com/vbb/showthread.p...ght=calculator

    does a turbo work in reverse:-
    http://www.sxoc.com/vbb/showthread.p...threadid=26566

    ill leave it to u all to list ones u think are usefull.

    Im looking for things like :-
    ditching the carbon canister
    fitting a dv
    fitting a catch tank
    replacing subby bushes

    i reckon these are a good start point

    sites outwith sxoc

    fitting gtr fmic:-
    http://www.dist.biz/top.htm

    pivot adjustable pop-ups:-
    http://www.ka24e.com/tech/phc/

    det explained:-
    http://www.autospeed.com/cms/article...estions&A=0348


    ill edit this thread as we go
    Last edited by Kev; 03-05-2009 at 09:48.

  2. #2
    Member John Bennett's Avatar
    Join Date
    Aug 2003
    Location
    N.E.
    Posts
    19,181
    Rides
    0
    Well, seeing as one of them gets requested almost daily, here's my SR20 fitting guide (electrical), and the digital dashboard fitting guide again:

    http://www.sxoc.com/vbb/showthread.php?t=212515 (incorporates fry1's mechanical fitting guide)

    http://www.sxoc.com/vbb/showthread.p...583#post967583
    240sx digital dashboard fitting.
    Last edited by John Bennett; 13-05-2006 at 12:31.

  3. #3
    Guest
    Join Date
    Feb 2004
    Location
    Sussex
    Posts
    1,018
    Rides
    0

  4. #4
    Guest
    Join Date
    Jul 2004
    Location
    Inverness, Scotland
    Posts
    5,430
    Rides
    0
    Original Nissan Brochures http://200sxs13.nismo.org/Brochures.html

  5. #5

  6. #6
    Guest Mike's Avatar
    Join Date
    Sep 2001
    Location
    Aberdeen
    Posts
    3,961
    Rides
    0

  7. #7
    Guest
    Join Date
    Jun 2001
    Location
    Fife, Scotland
    Posts
    21,781
    Rides
    0
    My z32 AFM fitting guide:-
    http://www.sxoc.co.uk/vbb/showthread...42#post1915842

    Rgds,

    Dunc.

  8. #8
    Guest
    Join Date
    Jul 2001
    Location
    Suffolk/Essex Border
    Posts
    11,586
    Rides
    0
    Brake sizes

    R32 T : 280mm x 26mm (single pot sumitomo caliper)
    R32 GTS-T (early) : 280mm x 26mm (single pot sumitomo caliper)
    R32 GTS-T type m : 280mm x 30mm (4 pot sumitomo caliper)
    R32 GTR : 296mm x 32mm (4 pot sumitomo caliper)
    R32 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
    R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)
    R33 GTS-4 : 280mm x 26mm (single pot sumitomo caliper)
    R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)
    R33 GTR : 324mm x 32mm (4 pot brembo caliper)
    R33 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
    R34 GT : 296mm x 30mm (4 pot sumitomo caliper)
    R34 GTT : 310mm x 30mm (4 pot sumitomo caliper)
    R34 GTR : 324mm x 32mm (4 pot brembo caliper)
    Z33 NA : 324mm x 32mm (4 pot brembo caliper)
    Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)
    Z32 TT : 280mm x 30mm (4 pot ali sumitomo caliper)
    S14, S15 : 280mm x 30mm (4 pot sumitomo caliper)

  9. #9
    Guest
    Join Date
    Feb 2004
    Location
    Sussex
    Posts
    1,018
    Rides
    0

  10. #10
    Guest
    Join Date
    Dec 2002
    Location
    West Sussex
    Posts
    2,411
    Rides
    0
    my blog with all techie stuff from my site plus a look at aerodynamics and soon a rebuild with head work.

    http://200sxblog.blogspot.com/

    /Steve

  11. #11
    Guest nene's Avatar
    Join Date
    Dec 2004
    Location
    South Wales
    Posts
    7,857
    Rides
    0
    I've noticed a few threads recently from people who have been looking around eBay for nice things to buy, and coming across "charging stabilisers".

    Here are a couple of threads which seem to cover the general opinions:

    http://www.sxoc.com/vbb/showthread.php?t=165323
    http://www.sxoc.com/vbb/showthread.php?t=169859

    If anyone (the supplier?) would care to give me one for free, I will be more than happy to pull it apart and connect it up to my car to see what, if anything, they do with the aid of Mr Multimeter. For the time being I would just like to say that my opinion is that you should spend your money on shiney things other than these

  12. #12
    Guest Stevecarter200's Avatar
    Join Date
    May 2001
    Location
    Colchester, Essex, UK
    Posts
    25,474
    Rides
    0
    I'm NOT the Chairman anymore, Ken was. He still likes poo though. Its not Jim either now. Ooh ooh, its now Doc!
    Blue '89 S13, 362 bhp, slowly getting more battered. Spec

    Opie Oils : MOT-a-Car : DriftWorks

  13. #13
    Guest
    Join Date
    Dec 2005
    Location
    Rugby, Midlands
    Posts
    345
    Rides
    0
    Quote Originally Posted by Kev
    pivot adjustable pop-ups:-
    http://www.ka24e.com/tech/phc/

    what are they??
    the link doesnt give any info on what is being installed and why!??!!?!?

  14. #14
    Guest Stevecarter200's Avatar
    Join Date
    May 2001
    Location
    Colchester, Essex, UK
    Posts
    25,474
    Rides
    0
    Quote Originally Posted by fly_ukcc
    what are they??
    the link doesnt give any info on what is being installed and why!??!!?!?
    If you dont know what they are you dont need the fitting guide.

    http://www.google.co.uk/search?hl=en...e+Search&meta=
    I'm NOT the Chairman anymore, Ken was. He still likes poo though. Its not Jim either now. Ooh ooh, its now Doc!
    Blue '89 S13, 362 bhp, slowly getting more battered. Spec

    Opie Oils : MOT-a-Car : DriftWorks

  15. #15
    Guest SM's Avatar
    Join Date
    Nov 2003
    Location
    Todmorden & Apex.
    Posts
    34,460
    Rides
    0

  16. #16
    Member arry's Avatar
    Join Date
    Dec 2001
    Location
    Essex
    Posts
    64,138
    Rides
    0
    http://www.sxoc.co.uk/vbb/showthread.php?t=204196

    can we add this for One Way Valve and possibly expand on it a little?
    Porsche 911 C2 & FN2 Civic Type R
    KTM 990 & Royal Enfield Bullet 500

  17. #17
    Member JCD's Avatar
    Join Date
    May 2003
    Location
    Belgium
    Posts
    1,438
    Rides
    0

    Do these wheels fit over front Z32 calipers?

    They fit
    - DICASTAL 7.5J x 17H2 ET35, fits front and rear Z32 calipers. BTW, they also fit over Bren's front 330mm 8-pot brake kit


    - BSA Racing Model 187 7J x 17 fits with a 6mm spacer and the Nissan-logo shaved off from the caliper [ ]anglegrinder job [/ ]



    - Facelift wheels:
    Quote Originally Posted by skyshack
    300ZX/S14 front brakes fit under single rib facelift 7 spoke wheels with a 5-6mm spacer.
    http://www.sxoc.com/vbb/attachment.p...5&d=1146596411

    300ZX/S14 front brakes fit under twin rib facelift 7 spoke wheels with a 15mm spacer and needs new wheels studs.
    http://i67.photobucket.com/albums/h2..._200/wheel.jpg

    310/315mm big brakes with 300ZX/S14 caliper need 17" wheels and may need spacers + studs.
    They don't fit
    - BORBET Design A 7.5J x 16 ET35, maybe will fit with spacers. I'll try once I've got them back.



    Please PM me your findings/deceptions so I can update this list.
    Last edited by JCD; 15-10-2006 at 06:44. Reason: adding stuff
    S13 "Evil Edition"

    Link to my supercharger project

    The amateur is a fool. Ignorant that something is impossible, he will succeed realizing it.
    -Paul Godley 2ZE

  18. #18
    Member JCD's Avatar
    Join Date
    May 2003
    Location
    Belgium
    Posts
    1,438
    Rides
    0

    The Thread thread

    Lambada sensor M18 x 1.5

    Oilfilter 3/4" x 16g BSP

    Head to exhaust manifold studs M10 x 1.25

    Turbo elbow studs (3 of them) M10 x 1.25, note that the part of the stud that is screwed in the cast elbow is a regular M10 x 1.5

    Turbo water feed banjo bolt(turbo side and engine side) M14 x 1.5

    Wheelstuds M12 x 1.25

    Oilpressure sender 1/8 x 28g BSPT

    Dashboard watertemperature sensor (with one wire)M12 x 1.25

    ECU watertemperature sensor (the one with two wires) M12 x 1.5

    Turbo oilfeed
    Thanks to Ben at Hosesolutions for these precise details:
    turbo side: 7/16JIC X 24tpi
    engine side (elbow): S13 is M12 x 1
    engine side (banjo): S14 is M12 x 1.25
    engine side (banjo): S15 is M12 x 1.25


    S13 Turbo oilfeed elbow
    Thread in engineblock 1/8 x 28g BSPT
    Thread in elbow M12 x 1mm

    Please PM me for addings to the list. Also, correct me if I'm wrong.
    BTW when I say "turbo elbow studs", I mean the studs that are on the turbo elbow (actually used to bolt-on the downpipe), not the ones that hold the elbow to the turbo.
    Last edited by JCD; 09-01-2008 at 13:14.
    S13 "Evil Edition"

    Link to my supercharger project

    The amateur is a fool. Ignorant that something is impossible, he will succeed realizing it.
    -Paul Godley 2ZE

  19. #19
    Member
    Join Date
    Mar 2004
    Location
    Chelmsford,Essex
    Posts
    24,220
    Rides
    0
    Is it worth putting this thread up ? It covers spacer sizes for facelift wheels with s14/a/Z32 calipers.

    http://www.sxoc.com/vbb/showthread.php?t=213174

  20. #20
    Member John Bennett's Avatar
    Join Date
    Aug 2003
    Location
    N.E.
    Posts
    19,181
    Rides
    0
    Quote Originally Posted by jwilkins
    Is it worth putting this thread up ? It covers spacer sizes for facelift wheels with s14/a/Z32 calipers.

    http://www.sxoc.com/vbb/showthread.php?t=213174
    Link to whatever you want . I'm still trying to compile the FAQ section, so anything useful linked in here I'll try and put into that.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •