useful threads

**Kev** · 12-11-2003, 19:47

but relevant to S13s).
http://www.sxoc.com/vbb/showthread.php?t=90905

Basic turbo connections
http://www.sxoc.com/vbb/showthread.php?t=244277

Volvo IC install
http://www.sxoc.com/vbb/showthread.php?t=346195

Brakes
paul s13's big brake conversion:-
http://www.sxoc.com/vbb/showthread.php?t=56219

Conversions
auto to manual conversion:-
http://www.sxoc.com/vbb/showthread.php?t=96711

SR20 conversion:-
http://www.sxoc.com/vbb/showthread.php?t=129050

RB25 DET Engine conversion:-
http://www.sxoc.co.uk/vbb/showthread.php?t=110234

Interesting articles
article on det:-
http://www.sxoc.com/vbb/showthread.php?s=&threadid=5274

gearing info:-
http://www.sxoc.com/vbb/showthread.p...ght=calculator

does a turbo work in reverse:-
http://www.sxoc.com/vbb/showthread.p...threadid=26566

ill leave it to u all to list ones u think are usefull.

Im looking for things like :-
ditching the carbon canister
fitting a dv
fitting a catch tank
replacing subby bushes

i reckon these are a good start point

sites outwith sxoc

fitting gtr fmic:-
http://www.dist.biz/top.htm

pivot adjustable pop-ups:-
http://www.ka24e.com/tech/phc/

det explained:-
http://www.autospeed.com/cms/article...estions&A=0348

ill edit this thread as we go

**John Bennett** · 10-06-2005, 20:23

Well, seeing as one of them gets requested almost daily, here's my SR20 fitting guide (electrical), and the digital dashboard fitting guide again:

http://www.sxoc.com/vbb/showthread.php?t=212515 (incorporates fry1's mechanical fitting guide)

http://www.sxoc.com/vbb/showthread.p...583#post967583
240sx digital dashboard fitting.

**LDA** · 11-07-2005, 15:03

t28 fitting how to.

http://www.sxoc.co.uk/vbb/showthread...ht=t28+fitting

L.

**kkydd** · 13-07-2005, 08:50

Original Nissan Brochures http://200sxs13.nismo.org/Brochures.html

**nismo joe** · 17-08-2005, 17:42

5 bolt conversion write up by Rudi

**Mike** · 21-08-2005, 13:51

fix lumpy idle

http://www.sxoc.com/vbb/showthread.p...2&page=1&pp=20

**dunc** · 23-10-2005, 17:55

My z32 AFM fitting guide:-
http://www.sxoc.co.uk/vbb/showthread...42#post1915842

Rgds,

Dunc.

**Cookie** · 28-10-2005, 12:11

Brake sizes

R32 T : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T (early) : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T type m : 280mm x 30mm (4 pot sumitomo caliper)
R32 GTR : 296mm x 32mm (4 pot sumitomo caliper)
R32 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-4 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)
R33 GTR : 324mm x 32mm (4 pot brembo caliper)
R33 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R34 GT : 296mm x 30mm (4 pot sumitomo caliper)
R34 GTT : 310mm x 30mm (4 pot sumitomo caliper)
R34 GTR : 324mm x 32mm (4 pot brembo caliper)
Z33 NA : 324mm x 32mm (4 pot brembo caliper)
Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)
Z32 TT : 280mm x 30mm (4 pot ali sumitomo caliper)
S14, S15 : 280mm x 30mm (4 pot sumitomo caliper)

**LDA** · 28-10-2005, 22:25

open diff welding topic.

http://www.sxoc.co.uk/vbb/showthread.php?t=149456

**stevec** · 23-12-2005, 17:23

my blog with all techie stuff from my site plus a look at aerodynamics and soon a rebuild with head work.

http://200sxblog.blogspot.com/

/Steve

**nene** · 28-12-2005, 13:41

I've noticed a few threads recently from people who have been looking around eBay for nice things to buy, and coming across "charging stabilisers".

Here are a couple of threads which seem to cover the general opinions:

http://www.sxoc.com/vbb/showthread.php?t=165323
http://www.sxoc.com/vbb/showthread.php?t=169859

If anyone (the supplier?) would care to give me one for free, I will be more than happy to pull it apart and connect it up to my car to see what, if anything, they do with the aid of Mr Multimeter. For the time being I would just like to say that my opinion is that you should spend your money on shiney things other than these

**Stevecarter200** · 31-12-2005, 11:10

http://www.sxoc.com/vbb/showthread.php?t=104032

**fly_ukcc** · 05-01-2006, 06:26

Originally Posted by Kev

pivot adjustable pop-ups:-
http://www.ka24e.com/tech/phc/

what are they??
the link doesnt give any info on what is being installed and why!??!!?!?

**Stevecarter200** · 05-01-2006, 11:42

Originally Posted by fly_ukcc

what are they??
the link doesnt give any info on what is being installed and why!??!!?!?

If you dont know what they are you dont need the fitting guide.

http://www.google.co.uk/search?hl=en...e+Search&meta=

SM · 08-01-2006, 14:16

S13 water stat swap - with pics (post #26)

http://www.sxoc.com/vbb/showthread.php?t=189377

**arry** · 19-03-2006, 16:36

http://www.sxoc.co.uk/vbb/showthread.php?t=204196

can we add this for One Way Valve and possibly expand on it a little?

**JCD** · 24-07-2006, 08:02

They fit

- DICASTAL 7.5J x 17H2 ET35, fits front and rear Z32 calipers. BTW, they also fit over Bren's front 330mm 8-pot brake kit

- BSA Racing Model 187 7J x 17 fits with a 6mm spacer and the Nissan-logo shaved off from the caliper [

]anglegrinder job [/

]

- Facelift wheels:

Originally Posted by skyshack

300ZX/S14 front brakes fit under single rib facelift 7 spoke wheels with a 5-6mm spacer.
http://www.sxoc.com/vbb/attachment.p...5&d=1146596411

300ZX/S14 front brakes fit under twin rib facelift 7 spoke wheels with a 15mm spacer and needs new wheels studs.
http://i67.photobucket.com/albums/h2..._200/wheel.jpg

310/315mm big brakes with 300ZX/S14 caliper need 17" wheels and may need spacers + studs.

They don't fit

- BORBET Design A 7.5J x 16 ET35, maybe will fit with spacers. I'll try once I've got them back.

Please PM me your findings/deceptions so I can update this list.

**JCD** · 24-07-2006, 08:15

Lambada sensor M18 x 1.5

Oilfilter 3/4" x 16g BSP

Head to exhaust manifold studs M10 x 1.25

Turbo elbow studs (3 of them) M10 x 1.25, note that the part of the stud that is screwed in the cast elbow is a regular M10 x 1.5

Turbo water feed banjo bolt(turbo side and engine side) M14 x 1.5

Wheelstuds M12 x 1.25

Oilpressure sender 1/8 x 28g BSPT

Dashboard watertemperature sensor (with one wire)M12 x 1.25

ECU watertemperature sensor (the one with two wires) M12 x 1.5

Turbo oilfeed
Thanks to Ben at Hosesolutions for these precise details:
turbo side: 7/16JIC X 24tpi
engine side (elbow): S13 is M12 x 1
engine side (banjo): S14 is M12 x 1.25
engine side (banjo): S15 is M12 x 1.25

S13 Turbo oilfeed elbow
Thread in engineblock 1/8 x 28g BSPT
Thread in elbow M12 x 1mm

Please PM me for addings to the list. Also, correct me if I'm wrong.
BTW when I say "turbo elbow studs", I mean the studs that are on the turbo elbow (actually used to bolt-on the downpipe), not the ones that hold the elbow to the turbo.

**Jonny Wilkinson** · 24-07-2006, 13:58

Is it worth putting this thread up ? It covers spacer sizes for facelift wheels with s14/a/Z32 calipers.

http://www.sxoc.com/vbb/showthread.php?t=213174

**John Bennett** · 24-07-2006, 14:31

Originally Posted by jwilkins

Is it worth putting this thread up ? It covers spacer sizes for facelift wheels with s14/a/Z32 calipers.

http://www.sxoc.com/vbb/showthread.php?t=213174

Link to whatever you want

. I'm still trying to compile the FAQ section, so anything useful linked in here I'll try and put into that.

Thread: useful threads

Thread Tools

useful threads

S13 cat/de-cat MOT stuff

Do these wheels fit over front Z32 calipers?

The Thread thread

Tags for this Thread

Posting Permissions