useful threads

[remo]

Blocked breather pipeing can cause a lack of oil to the bottom end, causing more ware on the bearings...

http://www.sxoc.com/vbb/showthread.p...45#post5922145

[Tosseef Hussain]

How so Tom? Just as I'm putting my block back together I know to look out for it.

[R3K1355]

How so Tom? Just as I'm putting my block back together I know to look out for it.

The engine needs to exchange gasses between the block and head to equalise pressure, the head->sump pipe is how this is achieved.

If it's blocked at either the pipe or the cam cover baffles you get accumulation of positive pressure in the block.

The positive pressure hinders oil flow, and pop go the bearings.

[Tosseef Hussain]

I understand. On my block below which one is the head to sump pipe, is it the obvious one in the centre?

[R3K1355]

It's on the other side

[Tosseef Hussain]

I suspected as much.

Thank you.

[Pablo13]

How to adjust your speedo:
http://www.sxoc.com/vbb/showthread.p...73#post6334773

[lhassall]

S13 Starter Removal & Sticky Solenoid Tips:

http://www.sxoc.com/vbb/showthread.p...-Solenoid-Tips

(Does anyone read this far down )

[Andy083]

Brake up grades useful blog click on link...

http://ph11ps.blogspot.com.au/search...&max-results=2

[bruceRS13]

Any guides on cylinder head removal and replacing any knakered valves?

i could do with this right now and i have done many searches all with a failed search

[bruceRS13]

ooh bump for that too dave. I'll be coming to put my engine back together soon too, so torque settings and sequences are a must if anyones willing to throw them up in this thread?

It'll help a lot of us.

i need this info but there is nothing on this when i search the key words

[ryry92]

Anyone know of a thread/write up on how to fit oil sandwich plate and gauge to blacktop sr20det? Currently in process of looking for the bits I need etc

Cheers

Ry

[arry]

i need this info but there is nothing on this when i search the key words

All within the s13 service manual mate - can you find a copy for download here anywhere? It used to be hosted here somewhere

[arry]

http://www.sxoc.com/vbb/showthread.p...-to-do-them-in

Torque settings for S13 headbolts

[filthy animal]

Any guides on battery relocation? going to fit my fmic in the next few days, went to halfords to find a smaller battery (hb154) but they wouldn't allow me to bring the battery back if it was the incorrect size, also could probably make up a kit for the price of a new battery. Thanks gents

[filthy animal]

Bump, I just need someone to confirm the size of cable I need, I'm going to order from vehicle wiring products, I know the positive cable has to be 4m long but not sure on the diameter also what size fuse and what junction box people are using. Cheers.

Sent from my GT-I9505 using Tapatalk

[skyshack]

This is USEFUL threads thread not a tech discussion. If you want to discuss a thread do it on the linked thread or start a new one.

[skyshack]

Manual ref and Function of each wire in UK spec S.M.J.

http://sxoc.com/vbb/showthread.php?5...=1#post6755168

[skyshack]

ejrocks400 Very useful LED bulbs list.
http://sxoc.com/vbb/showthread.php?5...S13-bulb-sizes