Results 1 to 5 of 5

Thread: Black top s14 swapped ps13

  1. #1
    Guest
    Join Date
    Jan 2024
    Posts
    1
    Rides
    0

    Black top s14 swapped ps13

    Hey guys wounder if anyone can help my friend recently purchased a ps13 with black to Sr engine but the problem is we cannot get it to run we sorted out the rata nest of wiring and removed the extras stereo etc so we can get a better look we have the car cranking but no spark or injector pulse chased power etc back to ecu found the power fc that had been fitted blown a cap inside also fpund alternator fuse has popped amongst few other fuses so all fuses been replaced stock s14a ecu has been fitted we now have power at the injectors and spark but the car still doest want to run it cranks coughs and then nothing (I will add it runs on easy start) with the oem ecu but take a plug out and it's bone dry
    Hopefully someone can point me in the right direction of what I need to be testing many thanks ash
    Ps13 Sr20 blacktop s14a engine and loom

  2. #2
    living on the edge p.nicholas's Avatar
    Join Date
    Jan 2002
    Location
    Essex meets
    Posts
    6,217
    Rides
    0
    Sounds like the immobiliser relay stopping the fuel pump to operate

  3. #3
    Guest
    Join Date
    Jun 2009
    Location
    walsall/tamworth
    Posts
    6,750
    Rides
    0
    fuel pump / wiring / hoses on wrong.

  4. #4
    Guest
    Join Date
    Jul 2005
    Location
    Netherlands
    Posts
    242
    Rides
    0
    If you've got spark, it must be the fueling. Is your pump engaging when putting the ignition on?

  5. #5
    living on the edge p.nicholas's Avatar
    Join Date
    Jan 2002
    Location
    Essex meets
    Posts
    6,217
    Rides
    0
    Hasn’t been back since op date

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •