AP brake fitment issue (Z32 setup)

[TomB]

Hello all, looking for some help..

I have a big brake kit that came off of an Z32 Auto TT and I’ve gone to fit it on my S13 which has Z32 hubs and the caliper bolts to the brackets are not in the right location.

they are offset by about 10mm inboard, so was wondering if there may have been subtle changes to mounting position between turbo/non turbo or a model year change?

From memory, the hubs on my car are from a non-turbo.

Nothing I can find indicates anything different other than potentially the caliper width to account for the diameter of the disc. Not the mounting holes.



Any help greatly appreciated

[Actual_Ben_Taylor]

Is this on the rear? Late model R34 had different mounting points for the rear calipers

[TomB]

It’s the front…

I’m wondering if the kit is for an R33 or R34 and the Zed that they came from had the Skyline hubs fitted in order for the kit to go on.

Need to find out now if the R33/R34 fit the Zed/S13 and if the caliper spacing is slightly different.

[Actual_Ben_Taylor]

I have an R34 AP setup on my S14, other than drilling the hubs for the larger bolts it went straight on

[piman2k]

Ask Hamish but I'm almost certain R34 Brembos and 350Z Brembos are interchangeable.