I dont need another project 13

[pointz]

Oh how it hides

Sent from my SM-G991B using Tapatalk

[p.nicholas]

Can tell you’ve done this before

[pointz]

Can tell you’ve done this before

This will be the 4th s13 I've somewhat saved/brought back.

5 including mine!

Last one tho.

Sent from my SM-G991B using Tapatalk

[pointz]

Done what I can of the rear sill until I get some outer sills!

Sent from my SM-G991B using Tapatalk

[green_rs13]

looks like you need to invest in some taller axle stands.

[pointz]

looks like you need to invest in some taller axle stands.

Need a ramp ideally but bigger stands would be a start

Sent from my SM-G991B using Tapatalk

[green_rs13]

i struggled for years on small stands like you have with bits of wood etc.. then bought some large ones and they are a total game changer.

[pointz]

More chassis pics to come getting on well with the welding but in the meantime.

Subframe is out, and an engine and gearbox sourced!
Engine I will strip, inspect and rebuild, hoping to keep oem pistons as nowhere seems to sell 0.5 oversize oem pistons any more and dont want to get into forging for whats going to be an as oem as possible build.

Interested to know if anyone can source oem oversize pistons?

Sent from my SM-G991B using Tapatalk

[pointz]

Front arch welded, waiting on more weld through so I can finish the chassis leg on this side.

Sills and replacement front x-member ordered also.

Sent from my SM-G991B using Tapatalk

[Jonny Wilkinson]

That's good work, mate. Keep at it...