Results 1 to 6 of 6

Thread: Random bits of electrical

  1. #1
    Member madskidsmike's Avatar
    Join Date
    Nov 2021
    Location
    Hereford
    Posts
    35
    Rides
    0

    Random bits of electrical

    Hi guys I'm relocating my wiring whilst my cars in bits. Come across a few plugs Im not to sure what they are. I think some may be to do with automatic systems which the car doesn't have as it's now manual. And the whole side of the fuse box that's empty. Does anyone know if I can just chop these all out atall :/
    Thanks

    Sent from my VOG-L09 using Tapatalk

  2. #2
    Member
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    199
    Rides
    0
    I have done a conversion myself. The first pic is where the auto looms plug to. I had a manual loom but still had to use them sockets for the reverse and the old auto neutral sensor. The connector with the two bigger cables on the right of the pic needed to be bridged on mine for it to start. Had to link the green and black (from 3rd socket from the right) to the Manual box reverse switch for that to work. Make sure you dont need them before you chop it.
    PROFESSIONAL REV COUNTER FIXING SERVICE. Message me


  3. #3
    Guest
    Join Date
    Jun 2017
    Location
    North Ayrshire
    Posts
    136
    Rides
    0
    If you are wanting to do it properly you are better de-pinning from the big square connector in the driver footwell and removing wiring from there, it does take time but saves having jumped connections as mentioned above.

  4. #4
    Member madskidsmike's Avatar
    Join Date
    Nov 2021
    Location
    Hereford
    Posts
    35
    Rides
    0
    Yes dude that's the plan anything I don't need will be traced back and completely taken out the loom dude

    Sent from my VOG-L09 using Tapatalk

  5. #5
    Guest
    Join Date
    Jun 2017
    Location
    North Ayrshire
    Posts
    136
    Rides
    0
    Removed all of these from my engine bay but can't remember which ones I then used for speed signal (red and something wires), then I also took the reverse signal and ran it through a new hole at the transmition tunnel (can't remember colours), the neutral position wire got shorted out further back in the cabin. The rest could have been for A/C, carbon canistor, auto trans delete.

  6. #6
    Member madskidsmike's Avatar
    Join Date
    Nov 2021
    Location
    Hereford
    Posts
    35
    Rides
    0
    Nice one dude thanks.

    Sent from my VOG-L09 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •