Results 1 to 1 of 1

Thread: Question about VVT, solenoids etc

  1. #1
    Guest Hugh Janus's Avatar
    Join Date
    Jun 2004

    Question about VVT, solenoids etc

    Can anyone confirm I’m doing this right.

    I’m testing the Solenoid as I believe it’s Fcuked.

    So I have a spare solenoid which I’ve plugged into the loom gone into Nissan Datascan, clicked VCT to in and start test…nothing no clicking
    Plug loom back into solenoid in the engine repeat as above click nothing.

    Checked voltage from pin 2 to ground with ignition on 11.80v

    The voltage doesn’t change whether VCT is turned on or off in NDS

    Turn off ignition no voltage.

    Is it looking like it have two shagged solenoids?
    Last edited by Hugh Janus; 03-09-2021 at 19:47.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts