I have a GTX2863r 0.64 AR that I'm thinking of putting on my SR but I'm worried about the internal WGs ability to control boost at lower levels. I'm not wanting to run the turbo at full attack as it's an unopened SR so I'm aiming for 14-15psi for high boost and probably 10psi for low boost (8psi actuator spring).
Unopened healthy SR20DET (70k miles)
Nismo 555cc Injectors (3.5 bar fuel pressure)
APW equal length bottom mount manifold
Tomei big capacity elbow
Z33 MAF
H-Dev or Nistune ECU (haven't decided)
Greddy Profec B boost controller
VAG coil pack conversion
Anyone have any info on whether I'll need to run an external WG to be able to run that low boost with any sort of stability? Last thing I want is to go to get it mapped and have the boost spiking all over the place.
If I do need to run an external WG, is running it from the exhaust housing ok? Running one on my manifold would be a pain in the arse as there's not really a great place for it and the manifold is Zircotec ceramic coated.
Thanks in advance for any help.