I wouldn't worry the photo looks fine. Mine was alot more squashed and I had to run the car for a week before I got the parts in. (I needed to get to work!).
I wouldn't worry the photo looks fine. Mine was alot more squashed and I had to run the car for a week before I got the parts in. (I needed to get to work!).
yeah thanks Markcro, luckily this car is a project not a daily runner so I have not needed to drive it hence taking my time!
If you're ever worried about it again, either unplug the cas and turn it over til the oil light goes out, or if you're super worried, pop the cam cover off, cas unplugged, turn it over til oil comes out the cam spray bars
Hi Slamz, yes that's exactly what I did...well at least looking at this wiring diagram we pulled F24 from F101 which I believe disconnects the Camshaft Position Sensor (CPS)
https://1drv.ms/u/s!Arf-yOsTGQrvixhXiRIXt9jUdrT5
We then turned the engine over twice and on the second time the oil light went out and now goes out on starting
I guess the main concern was having heard that the oil light only indicates a minimal low pressure hence why I am fitting a separate pressure gauge