Results 1 to 7 of 7

Thread: Nistune board, NATS?

  1. #1
    Guest
    Join Date
    Apr 2012
    Location
    Northampton
    Posts
    930
    Rides
    0

    Nistune board, NATS?

    Morning,

    I've got Nistune board in my ECU.

    NATS has been snapped out but the car still keeps shutting itself off after 4 seconds or so.

    It sounds like spark is cutting out with the way the car shuts down.

    I have got some coilpacks from Protuner fitted.

    Every now and then when I start the car and it shuts off, it won't start again.

    Any idea what this could be?

  2. #2
    Guest speedingmofa's Avatar
    Join Date
    Nov 2012
    Location
    the Netherlands
    Posts
    608
    Rides
    0
    If i remember correctly, there is an option to turn NATS on/off on Nistune. I could look it up in the software when i get home

  3. #3
    Guest
    Join Date
    Apr 2012
    Location
    Northampton
    Posts
    930
    Rides
    0
    If you could that would be great.

    Looked at the spark plugs today.

    It is running rich.

  4. #4
    Guest speedingmofa's Avatar
    Join Date
    Nov 2012
    Location
    the Netherlands
    Posts
    608
    Rides
    0
    Quote Originally Posted by kishan View Post
    If you could that would be great.

    Looked at the spark plugs today.

    It is running rich.
    There is a section in Nistune that enables or disables NATS. It's in Flag settings>NATS flags
    There are 2 options there.
    Enable NATS bit 0
    Enable NATS bit 1
    The rest of the bits are unused

  5. #5
    Guest
    Join Date
    Apr 2012
    Location
    Northampton
    Posts
    930
    Rides
    0
    Thanks for looking in to that for me.

    I'm going to call Horsham Developments about buying their consult cable.

    Guessing that's all I'll need as well as the software to look into it?

  6. #6
    Guest speedingmofa's Avatar
    Join Date
    Nov 2012
    Location
    the Netherlands
    Posts
    608
    Rides
    0
    Quote Originally Posted by kishan View Post
    Thanks for looking in to that for me.

    I'm going to call Horsham Developments about buying their consult cable.

    Guessing that's all I'll need as well as the software to look into it?
    With only the cable, you can only read out nistune.
    Any changes to Nistune requires a license which goes for around $150 usd

  7. #7
    Guest
    Join Date
    Apr 2012
    Location
    Northampton
    Posts
    930
    Rides
    0
    All sorted. Turns out the wrong base map was put on the car. Had Martin Battye come out to fix it all! Thanks for your replies.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •