Computer Help - CAD Workstation

[Asht_200]

Vorderman? F that i will take her successor please. Even if she is a bit nuts.

Rachel Riley over Vorderman? Are you kidding?

And Vorderman has said she is horny and she is single


Sent from my iPhone using Tapatalk Pro

[Drifter]

If it’s down to that I’ll throw in this tart lol




Sent from my iPhone using Tapatalk

[Asht_200]

If it’s down to that I’ll throw in this tart lol




Sent from my iPhone using Tapatalk

Was it cold when this was taken?


Sent from my iPhone using Tapatalk Pro

[piman2k]

Focus.

I still need a computer that I can do some CAD on. And I am no closer.

[Asht_200]

Focus.

I still need a computer that I can do some CAD on. And I am no closer.

Sorry Ryan


Have you seen Carol Vorderman’s ass?



Sent from my iPhone using Tapatalk Pro

[skyshack]

Big tits are Overrated. I've been slapped around by bigger than Carol's, they moved way too fast to latch on. The pair of glasses I was wearing never sat square on the desk after that. There wasn't any flavoured lube back then, Johnson's lotion tastes foul and next morning I found I still had some - literally wet behind the ears.

I'd got a broken arm at the time, fell off a 500/4 earlystocks at Mallory hairpin the week before.

She also looked after a guy with a broken foot who had dangled his toes off the pavement at a ped crossing while walking between rail station in London. Didn't help that he was a sandal wearing hippy that lived in a git in France (way before A Year in Provence and all that trendy stuff).

Bunch of hairy bikers in a pub on a stag do, one already armless and another legless at 7pm on a Friday. Could have had VICTIM written on our foreheads.

She was having such a good time she did us both twice.

Maybe this is in the wrong thread?

[sideways14a]

If it’s down to that I’ll throw in this tart lol




Sent from my iPhone using Tapatalk

Those command hooks you get at DIY stores are getting everywhere now.

[Asht_200]

Big tits are Overrated. I've been slapped around by bigger than Carol's, they moved way too fast to latch on. The pair of glasses I was wearing never sat square on the desk after that. There wasn't any flavoured lube back then, Johnson's lotion tastes foul and next morning I found I still had some - literally wet behind the ears.

I'd got a broken arm at the time, fell off a 500/4 earlystocks at Mallory hairpin the week before.

She also looked after a guy with a broken foot who had dangled his toes off the pavement at a ped crossing while walking between rail station in London. Didn't help that he was a sandal wearing hippy that lived in a git in France (way before A Year in Provence and all that trendy stuff).

Bunch of hairy bikers in a pub on a stag do, one already armless and another legless at 7pm on a Friday. Could have had VICTIM written on our foreheads.

She was having such a good time she did us both twice.

Maybe this is in the wrong thread?

No it’s alright

My Girl ( she was an ex girlfriend at the time)

I’d set fire to myself and ended up in Broomfield A/E - I didn’t know then she ran the place. She got me taken care of

Last time we were at A/E 18 years old in a car accident, she wouldn’t leave my side

We just bumped into each other


Sent from my iPhone using Tapatalk Pro

[Drifter]

Focus.

I still need a computer that I can do some CAD on. And I am no closer.

Have a chat with these guys...

https://www.workstationspecialist.co...s-for-CAD-Use/

They built my laptop and desktop.


Sent from my iPhone using Tapatalk

[sideways14a]

Or go to Dell/hp ect and ask for a decent high end but consumer level budget workstation and try and get a pro series card with it for the gpu side (although as i said the gamer cards sometimes do work fine as cad cards)
Imho 8 core/32GB ram/1TB SSD + whatever video card and thats the base config.

Post up here what you have been offered and we will look at its tits.

[Asht_200]

You had to say it




Sent from my iPhone using Tapatalk Pro

[sideways14a]

One set for each eye.

[Drifter]

Sorry tech question lol

I have 4 slots all with these in the desktop...



Thanks to a detailed engine model from MAN it’s groaning a bit. Any suggestions if I were to change say 2 or all 4 to 16gb? Seems to be loads on ebuyer with different speeds and all sorts.


Sent from my iPhone using Tapatalk

[piman2k]

I haven't made any progress with this. Does someone want to make some money and build me a PC that'll satisfy the requirements of CAD like Fusion360 and games like RFactor2?

[sideways14a]

Hod on if i can find some time later i will do a dell config... well that depends on whether this fooking SCCM server stays up.. i have had to sacrifice 3 virgins and at least 19 cows over the last few days on this thing and i am running out of virgin cows.