Hi guys
So i've got a regular s14 diff with the 3x2 bolt half shafts and stubs.
I've acquired R33 gtst 5 bolt half shafts... am i only missing the stubs from the gtst to make it work? Or am i missing something?
Going by the length... it seems it's not as easy.
S14 half shafts
635mm - short side, abs, 3x2 pattern, 29 splines 30mm, left
673mm - long side, abs, 3x2 pattern, 29 splines 30mm, right
R33 GTST
604mm - short side, 5x1 pattern, 29 splines 30mm, left
650mm - long side, 5x1 pattern, 29 splines 30mm, right
So unless the r33 stubs are 25mm longer on each side... it doesn't seem like it's a straight swap