Results 1 to 3 of 3

Thread: vacuum pipes

  1. #1
    Guest
    Join Date
    Apr 2019
    Location
    wocstershire
    Posts
    41
    Rides
    0

    vacuum pipes

    im doing a sr20det, bent cam engine and im not sure what pipes go where on the induction, its going into a project im doing, i want to run a boost gauge and have a avcr boost controller, can anyone help out, do i need so many outlets or can some be capped of, there are 4 on the plenum and 4 on the throttle body 2 have be capped by the previous owner on the throttle body

  2. #2
    Guest
    Join Date
    Jan 2012
    Location
    Kent
    Posts
    1,873
    Rides
    0
    Run one to the controller, one to the boost gauge. I believe on the sr inlets 2 of the take offs are vacuum, while 2 only do boost, you want the boost gauge on a vacuum line, but the boost controller on a boost only one. Vacuum take off will be post throttle body, boost will be pre throttle body

  3. #3
    Guest
    Join Date
    Apr 2019
    Location
    wocstershire
    Posts
    41
    Rides
    0
    ok dont suppose you have any pictures, there are 8 points in total for on the plenum and 4 on the throttle body,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •