Results 1 to 9 of 9

Thread: SR20 intake pipe restriction for 350hp?

  1. #1
    Guest
    Join Date
    Sep 2017
    Location
    Shetland
    Posts
    12
    Rides
    0

    SR20 intake pipe restriction for 350hp?

    Hi, Iíve bought a 2871r bolt on replacement turbo for my s14, and was going to aim for roughly 350hp.
    Itís the version of 2871 that you bolt your standard turbo intake elbow onto, then put the standard rubber intake pipe onto that.

    I was wondering if this will be a restriction for 350hp, should I buy an adaptor to fit a 3 inch pipe onto the turbo then make my own intake pipe? I was going to run it with a map sensor as well so no maf is needed.

    thanks in advance!

  2. #2
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,084
    Rides
    1
    I run over 400bhp with that set up
    South west Events and local meet info. See here


    My car on THRLL: http://thrll.com/car/1998-nissan-200sx-12410
    Chris Cooke Photograpy: https://www.facebook.com/ChrisCookePhotography
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  3. #3
    Guest
    Join Date
    Sep 2017
    Location
    Shetland
    Posts
    12
    Rides
    0
    Awesome, I know the turbo can do more but I want to make my gearbox last until I can afford a z33 swap. Did you make 400hp on a 3 inch inlet?

  4. #4
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,084
    Rides
    1
    Canít really see it in this picture but itís all I have currently.

    Iím running the factory turbo intake elbow in to an apex metal intake pipe which replaces the original black plastic intake pipe.





    Sent from my iPhone using Tapatalk
    South west Events and local meet info. See here


    My car on THRLL: http://thrll.com/car/1998-nissan-200sx-12410
    Chris Cooke Photograpy: https://www.facebook.com/ChrisCookePhotography
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  5. #5
    Guest
    Join Date
    Sep 2017
    Location
    Shetland
    Posts
    12
    Rides
    0
    Ah right! looks awesome, I might just make my own off the factory turbo intake elbow then. Thanks!

  6. #6
    Graphics Guru Davus200's Avatar
    Join Date
    Sep 2009
    Location
    South West
    Posts
    2,396
    Rides
    0
    I made my own as the standard rubber one use to collapse on hot days... I just used some 3 inch pipe and silicone joiners I kept the standard elbow straight off the turbo. You can get bolt on straight outlets too

  7. #7
    Guest
    Join Date
    May 2014
    Location
    USA
    Posts
    17
    Rides
    0
    Apexi makes a good induction kit to replace that rubber intake. Easy to swap out the MAF for a straight pipe to the filter.

  8. #8
    Guest
    Join Date
    May 2020
    Posts
    3
    Rides
    0
    What maf sensor and housing is that your running?

    Sent from my G8441 using Tapatalk

  9. #9
    Guest
    Join Date
    May 2014
    Location
    USA
    Posts
    17
    Rides
    0
    Quote Originally Posted by altezza88 View Post
    What maf sensor and housing is that your running?

    Sent from my G8441 using Tapatalk
    Z33 MAF and housing. All the cool kids are calling it a R35 GTR MAF, but it's literally the same part number.
    Think I saw that Apexi also sells a housing for the MAF of you wanted to run that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •