-
Guest
Diff seals
So my diff has puked all over the passenger side of the car. Exhaust, wheel well, subframe, you get the idea! It stinks. Pretty sure a seal has failed by the way its spread everywhere. Does anyone know the sizes before i take the diff out to investigate? And is this something that people have seen before?
Can i change the two seals with the diff in? Just pop out the half shafts?
Sent from my iPhone using Tapatalk
-
Guest
pop the half shafts out with a lever bar, a jolt type action works the best. then hammer a thin screw driver between the old seal and the casing and pry the seal out. they are about £20 each from Nissan last time I enquired (ages ago) personally I would just change the one that's leaking and not disturb the other.
if you have 5 bolt shafts just undo all the inner bolts and push it up out the way.
-
Guest
Would you just use genuine Nissan parts? I was going to do both sides. See how much they are when my Local stealer actually answers the phone!!
Sent from my iPhone using Tapatalk
-
Guest
a seal is a seal so if you can source one through a different outlet for much cheaper then go for it.
-
Guest
Nissan should have them as they are the same on all the diffs.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules