Results 1 to 5 of 5

Thread: 1990(H) 200sx S13 Pre Facelift (130k)

  1. #1
    Guest Snaps's Avatar
    Join Date
    Feb 2010
    Location
    Bishops Stortford, Herts
    Posts
    258
    Rides
    0

    1990(H) 200sx S13 Pre Facelift (130k)

    The time has come for me to part ways with my S13.This was my daily driver for the first 5 years of ownership then was taken off the road in January 2015 due to a leaky turbo seal, which I stripped out then life got in the way. The millage is 130k and has a grand total of 4 previous owners. The car has not been tracked or drifted.

    The car is largely stock in appearance but has some performance supporting mods as listed below. Like most S13s this suffers from the usual rust problems, sils, arches and so on. Detailed photos of the condition of the underside and rest of the car in the dropbox link below. The interior is still bone dry, even after a jet wash.

    Fitted
    300zx brake upgrade (full refub at time of fitting)
    Hel braided lines
    Blitz Exhaust (Removed so it will get on a trailer)
    4x Rota GTR 18x8.5
    Stage 1 chip
    Extended forged hub bolts
    JIC Magic Coilovers
    HKS Mushroom
    Apex short shifter
    Scoop headlight cover
    Front strut brace
    Rear strut brace

    Unfitted
    FMIC
    421 manifold
    Apex Decat pipe
    Standard spare door
    Standard spare wings
    Spare gearbox
    2x Rota torques 17x7
    4x Original pre facelift alloys

    https://www.dropbox.com/sh/6xavyq40x...kp8wYT3Xa?dl=0

    Im looking for 1800ono cash, I know if I was to spend the time stripping it I would easily return over 3500 in parts, however I would rather keep another S body on the road. It will need to be tailored away due to the lack of turbo. Car is located near Ingatestone, Essex

    PM for more info / number
    Last edited by Snaps; 21-10-2019 at 14:02.

  2. #2
    Dorset & Hants Rep pointz's Avatar
    Join Date
    Sep 2009
    Location
    southampton
    Posts
    7,476
    Rides
    0
    Any pics of the underside, sills, chassis legs, front inner arches, etc.

    Struggle to get 3.5k even breaking in the current market, get 800 for engine box ecu loom but that's a running engine with good comp results!

  3. #3
    Guest Snaps's Avatar
    Join Date
    Feb 2010
    Location
    Bishops Stortford, Herts
    Posts
    258
    Rides
    0
    Quote Originally Posted by pointz View Post
    Any pics of the underside, sills, chassis legs, front inner arches, etc.

    Struggle to get 3.5k even breaking in the current market, get 800 for engine box ecu loom but that's a running engine with good comp results!
    Thanks, i'm a bit out of the current market, just what ive seen bits go for on ebay. All but the front inner arches should be in the dropbox. I can take them tomorrow when I'm back.

  4. #4
    Member
    Join Date
    Apr 2016
    Location
    hastings
    Posts
    158
    Rides
    0
    Hi, what fmic is it? Also does it have the relevant pipework for s13 and are you willing to sell separate with postsge? Cheers

  5. #5
    Guest
    Join Date
    Feb 2012
    Location
    herne bay
    Posts
    11
    Rides
    0
    This sfs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •