Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: CA18DET Parts for sale

  1. #1
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0

    Exclamation CA18DET Parts for sale

    My old CA18DET is no longer cutting it against my mates who have started supercharging their M3's so to keep pace I'm scrapping my engine and swapping to LS Power so all my CA parts are up for sale.
    If it's not listed please ask.

    My CA was running reliably 370 bhp it was mapped by Greg from Protuner.

    Syvecs ECU SP6GP (mapped for 370 bhp with my mods) comes with CAS setup for the Syvecs, Engine Loom, Injectors and rotary switch for changing map. £1600ono

    Borg Warner EFR 6258 with manifold and downpipe to connect to where the CAT should be on a normal SX. Turbo is an up top mount. The manifold is of unknown make it's been welded a few times but it has been solid for the last season.
    It was a T3 and I have had it altered for the T25 flange. I wasn't after huge power but response and drive ability. £1200 ono
    (I also throw in the power steering bracket which I had to edit so I could do the bolts up on the manifold.)

    Tomei Pon Cams 260's with or without adjustable vernier pullies. Pullies are ones that I've had made because I could never get ones to balance nicely for a price I was willing to pay. £400 ono

    CA18DET Head been flowed and ported I have no idea who originally did the work but I bought the head off here. £500 ono

    Inlet manifold done to match the head

    Crank allegedly cryogenically treated, I have no proof also bought off here has worked well for me £300 ono

    Rods and forged pistons also allegedly cryogenically treated £200 ono

    Oil Filter Housing without the water heat exchange thingy £75

    Splitfire Coil Packs with loom On hold

    Single piece CA Prop needs balancing £75

    Cometic CA Head Gasket Brand New £100

    Nistune ECU never used offers

    Stage 3 Horesham Developments ECU SOLD

    Other CA ECU's offers

    Engine Brackets, Cam/Belt covers, all in bright orange offers.

    Skyline GTR Injectors £120

    Genuine Z32 AFM £100 (I think I have more than one)

    2 good CA Gearboxes if someone wants to sort out shipping.

    Watch this thread for more parts as I find them.

    All prices are without shipping and I'm based in Jersey so I'm open to cunning ways of shipping.

    If somebody wants to buy it all or put a package together also let me know.

    Also possible swaps for fuel cell, pedal boxes, LS parts.

    Any questions please ask.

    Thanks for looking
    Adrian
    Last edited by acs; 30-07-2019 at 11:49. Reason: Parts Sold

  2. #2
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    Btt

  3. #3
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    Btt

  4. #4
    Guest
    Join Date
    Aug 2011
    Location
    East London
    Posts
    297
    Rides
    0
    Quote Originally Posted by acs View Post
    My old CA18DET is no longer cutting it against my mates who have started supercharging their M3's so to keep pace I'm scrapping my engine and swapping to LS Power so all my CA parts are up for sale.
    If it's not listed please ask.

    My CA was running reliably 370 bhp it was mapped by Greg from Protuner.

    Syvecs ECU SP6GP (mapped for 370 bhp with my mods) comes with CAS setup for the Syvecs, Engine Loom, Injectors and rotary switch for changing map. £1600ono

    Borg Warner EFR 6258 with manifold and downpipe to connect to where the CAT should be on a normal SX. Turbo is an up top mount. The manifold is of unknown make it's been welded a few times but it has been solid for the last season.
    It was a T3 and I have had it altered for the T25 flange. I wasn't after huge power but response and drive ability. £1200 ono
    (I also throw in the power steering bracket which I had to edit so I could do the bolts up on the manifold.)

    Tomei Pon Cams 260's with or without adjustable vernier pullies. Pullies are ones that I've had made because I could never get ones to balance nicely for a price I was willing to pay. £400 ono

    CA18DET Head been flowed and ported I have no idea who originally did the work but I bought the head off here. £500 ono

    Inlet manifold done to match the head

    Crank allegedly cryogenically treated, I have no proof also bought off here has worked well for me £300 ono

    Rods and forged pistons also allegedly cryogenically treated £200 ono

    Oil Filter Housing without the water heat exchange thingy £75

    Splitfire Coil Packs with loom £75

    Single piece CA Prop needs balancing £75

    Cometic CA Head Gasket Brand New £100

    Nistune ECU never used offers

    Stage 3 Horesham Developments ECU £200 ono

    Other CA ECU's offers

    Engine Brackets, Cam/Belt covers, all in bright orange offers.

    Skyline GTR Injectors £120

    Genuine Z32 AFM £100 (I think I have more than one)

    2 good CA Gearboxes if someone wants to sort out shipping.

    Watch this thread for more parts as I find them.

    All prices are without shipping and I'm based in Jersey so I'm open to cunning ways of shipping.

    If somebody wants to buy it all or put a package together also let me know.

    Also possible swaps for fuel cell, pedal boxes, LS parts.

    Any questions please ask.

    Thanks for looking
    Adrian
    PM'd

  5. #5
    Guest
    Join Date
    Dec 2009
    Location
    poole
    Posts
    268
    Rides
    0
    What make are the pistons and rods? Are they standard size or oversized?


    Sent from my iPhone using Tapatalk

  6. #6
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    all pm's replied to

  7. #7
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    The rods are standard Nissan rods that have allegedly been cryo treated
    The Pistons are oversized my mind's gone blank to their make at the moment I'll check.

    Thanks
    A

  8. #8
    Guest
    Join Date
    Jul 2012
    Location
    Surrey
    Posts
    124
    Rides
    0
    Pm’d

  9. #9
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    PM replied sorry SWMBO had very different plans then I did for my weekend.

    Forgot to look at the make of pistons will do that tonight.

  10. #10
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    Pistons are Wiseco pistons with the cut out for the oil squirters

  11. #11
    Guest
    Join Date
    May 2007
    Location
    London
    Posts
    2,028
    Rides
    0
    Are the vernier pulleys available separately? If so how much? I have the same problem finding balanced ones that don't wobble.

    Cheers

  12. #12
    Guest
    Join Date
    Jan 2010
    Location
    Huddersfield
    Posts
    184
    Rides
    0
    Pm sent about cams and pulleys


    Sent from my SM-G965F using Tapatalk

  13. #13
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    Quote Originally Posted by user23456 View Post
    Are the vernier pulleys available separately? If so how much? I have the same problem finding balanced ones that don't wobble.

    Cheers
    Yup everything is for sale it's better it going to a home where it'll be used than sitting in my shed gathering dust.

  14. #14
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    Quote Originally Posted by DaveB666 View Post
    Pm sent about cams and pulleys


    Sent from my SM-G965F using Tapatalk
    PM replied

  15. #15
    Guest
    Join Date
    May 2007
    Location
    London
    Posts
    2,028
    Rides
    0
    how much for the pulleys seperately?

  16. #16
    Member
    Join Date
    Oct 2009
    Location
    Jersey
    Posts
    120
    Rides
    0
    Quote Originally Posted by user23456 View Post
    how much for the pulleys seperately?
    £60 including shipping?

  17. #17
    Guest
    Join Date
    May 2007
    Location
    London
    Posts
    2,028
    Rides
    0
    Any chance on a deal with the cams. Could use the 260s as spares. Pm me. I'll clear my inbox now

  18. #18
    Guest
    Join Date
    May 2007
    Location
    London
    Posts
    2,028
    Rides
    0
    Also pics would be nice of possible.

    Thanks

  19. #19
    Guest Adzsy's Avatar
    Join Date
    Jul 2005
    Location
    Huddersfield
    Posts
    1,378
    Rides
    0
    Are the Splitfires still available?

  20. #20
    Guest
    Join Date
    Aug 2011
    Location
    East London
    Posts
    297
    Rides
    0
    No, I bought them a couple week go.

    Sent from my GM1920 using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •