-
Guest
sr20det engine forged
For sale is my sr20det forged engine running 86.5mm CP pistons eagle rods with a 8.5;1 compression ratio the block has been
machined bored to 86.5mm and has been chemically cleaned after machining also top side has been resurfaced. running the standard crack that has been lighten balanced and knife edged and reground 0,25mm oversized with 0.25 oversized ACL race main bearings big end bearings and thrust washers. also has ARP main stud fitted with ARP rod studs oversided sump fitted. new main seal and housing fitted brand new s15 oil pump also fitted.The top end head has been fully machine ported polished as much as possible gas flowed skimmed and chemically cleaned. head has had brand new valve guide and seals with Supertech stainless steel intake and exhaust valves with Supertech dual valve springs and titanium retainers ARP head bolts also fitted and a Tomei 86.5mm/1.5mm head gasket. N0 cams lifters or rockers fitted full nissan engine gasket set also fitted. all engine work has been carried out by Chesmans engineering LTD in coventry. Any questions please ask. will take offers up to and around £3000 IMG_0813.jpgIMG_1931.jpgIMG_1651.JPGIMG_1223.jpgIMG_1656.JPG
Last edited by ree.mrv; 13-07-2019 at 17:19.
-
Guest
-
Guest
-
Guest
-
Guest
-
Guest
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules