-
Guest
Different diff output flanges
Hi all,
I’ve recent acquired a lovely quaife LSD for the PS and went to fit it to the old girl last night to find the 5x1 flanges I have in my existing VLSD are 2 different sizes where as the two 3x2 bolt flanges on the quaife LSD are the same size.
Am I right in thinking if I can get another smaller 5x1 flange to use with my existing smaller 5x1 I can swap them out no worries?
Sent from my iPhone using Tapatalk
-
Guest
you need flanges for LSD, VLSD nor open diff flanges will fit. but you can modify opendiff flanges to fit LSD
I had 3x2 shafts. pics are shitty, sorry
Last edited by trkoo; 05-07-2019 at 08:41.
-
Guest
Soo what your saying is that open flanges will fit if they are modified? in what way do they need to be modified dude?
-
I <3 BBS LM
Probably easier to change the driveshafts
-
Guest
look at 2 left flanges and 5x1 on the right. the 2 left are from open diff. if you look closely you will see that open diff flanges are slightly longer, circlip groove on other position
Poslano z mojega BLA-L29 z uporabo Tapatalk
-
Guest
If it's a quaife atb helical, take the locking ring off the end of the output shafts! I learned that the hard way.
You can just get the long shaft machined down. I got mine installed by quaife and that's what they did, had no problems at all.
Sent from my SM-G950F using Tapatalk
-
Guest
thanks for the info gents,
Just thinking though, by machining down the larger shaft wont i lose a large contact area of spline rendering the shaft a little more weaker?
failing that it may be time to change the shafts which isnt my top choice as ill be going to the 2 x 3 configuration which isn't really what i want to do...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules