-
Guest
Timing/compression Help
So I’ve had lots of trouble getting my car to start after being rebuilt. The best I’ve managed to get my compression is C1 - 168psi C2 -150psi C3 - 150psi C4 - 100psi. I had to play around with the timing to get it to that. I also have adjustable Greddy Cams, so I’m guessing I’m gunna need to adjust them to get cylinder 1 lower and cylinder 4 higher. Should I be advancing or retarding the timing to get them all closer to 150psi?
-
Guest
Set them to 0 and try it, you can’t just move the timing around to balance out your compression results. To set your cam gears properly you need a few dial gauges and a degree wheel.
Sent from my iPhone using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules