Results 1 to 2 of 2

Thread: Timing/compression Help

  1. #1
    Guest
    Join Date
    May 2019
    Location
    Corby
    Posts
    27
    Rides
    0

    Timing/compression Help

    So Iíve had lots of trouble getting my car to start after being rebuilt. The best Iíve managed to get my compression is C1 - 168psi C2 -150psi C3 - 150psi C4 - 100psi. I had to play around with the timing to get it to that. I also have adjustable Greddy Cams, so Iím guessing Iím gunna need to adjust them to get cylinder 1 lower and cylinder 4 higher. Should I be advancing or retarding the timing to get them all closer to 150psi?

  2. #2
    Guest jj205mi16's Avatar
    Join Date
    Sep 2009
    Location
    Ayrshire, Auchinleck
    Posts
    1,421
    Rides
    0
    Set them to 0 and try it, you canít just move the timing around to balance out your compression results. To set your cam gears properly you need a few dial gauges and a degree wheel.


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •