Hi there
I have swapped my sr20det from a 97 auto s14a into a 97 jdm s14 which had a sr20de.
I used the main engine harness from the original DET car, plugged everything together and there’s no power to fuel pump. Not even triggering the relay in the footwell.
Traced the wire for it into the engine bay (black and yellow wire) into a plug that sits inbetween the inlet manifold and the head, if I put power to that it triggers the relay and powers on the pump. Checked over fuses/grounds and everything is as it should be.
Haven’t actually got round to cranking the car over yet as there’s no oil in it but I doubt that would resolve the issue.
Any tips or advice?
Gracias
Sent from my iPhone using Tapatalk