-
Guest
Power steering high pressure hose, fittings?
Hi guys,
My power steering high pressure hose is leaking and I'm trying to source one locally, any companies on here sell them before I go to pirtek? Also, what are the fittings at the pump end and the rack end?
Many thanks
Pete
-
Guest
If I remember correctly the rack high pressure side is M14x1.5 but it is an odd fitting as it has an o-ring on it. The Return side on the rack is M16x1.5 and again is a special fitting. Unfortunately I'm not certain on the pump side it is either a 14mm or 16mm banjo (an r33 PS pump is 16mm)
You can actually make you're own high pressure line if you teflon steel braided hose and Teflon -AN fittings. it's -6 for the pressure line and -8 for the return. I did this on mine for an RB25 Swap and it worked flawlessly.
-
Guest
-
Guest
These can also be sourced from the UK, A company called Torques sells them (they are in Abergavenny but sell a lot through ebay)
-
Guest
Thanks for your help guys! I've used Torques before.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules