Hi all
I want to put a switch in to switch off my fuel pump. What wire do i need to tap in to from the ignition?
Thanks
Hi all
I want to put a switch in to switch off my fuel pump. What wire do i need to tap in to from the ignition?
Thanks
Depending on what you want to achieve you could cut the fuel pump relay signal wire from the ecu and put a switch in that. ECU is in passenger foot well so running wires to dash shouldn't be tricky.
Have a look at the ECU connector pin out diagrams to show you what wire to cut.
on s14a its pin 106 and on a early s14 its 18.
http://www.eatsleepboost.lt/tech-inf...s-and-pinouts/