Results 1 to 10 of 10

Thread: Still No Spark!

  1. #1
    Guest
    Join Date
    May 2019
    Location
    Corby
    Posts
    27
    Rides
    0

    Still No Spark!

    So I’m getting really frustrated with my car. I’ve had an engine rebuild and I’m trying to get my engine running.
    It’s cranking over, I’m getting fuel pressure, but no spark from any of the coil packs.

    So far I’ve tested for spark with each of the coils and each of the spark plugs and nothing.
    I’ve replaced the Ignition Module
    I’ve tested the ground wire in multiple places and directly to the battery!
    These are brand new spark plugs

    I don’t know where I’m going wrong, all the coils worked when they came off the car, I wouldn’t imagine all of them would have gone bad!

    Any help would be appreciated, I’m open to any suggestions

    Lewis
    Last edited by lewi565; 23-05-2019 at 05:43.

  2. #2
    Guest
    Join Date
    Aug 2012
    Location
    Belgium
    Posts
    78
    Rides
    0
    did you connect the ground wire on the coilpack loom ?

  3. #3
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,381
    Rides
    1
    Is the “new” ignitor tested? Is the cas installed with the dots etc lined up?
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  4. #4
    Guest
    Join Date
    May 2019
    Location
    Corby
    Posts
    27
    Rides
    0
    Yes I’ve connected the coil loom earth. And I shall check the CAS

  5. #5
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,381
    Rides
    1
    There is a guide on YouTube if you’ve not done it before.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  6. #6
    Guest
    Join Date
    Jun 2009
    Location
    walsall/tamworth
    Posts
    6,744
    Rides
    0
    unplg the injector loom, plug in a spare cas and give it a spin you should hear the coil packs fire.
    if that don't work you can earth out each pin on the ecu one at a time to fire each coil pack individually

    could just be your cas is fitted wrong.
    Last edited by green_rs13; 23-05-2019 at 19:10.

  7. #7
    living on the edge p.nicholas's Avatar
    Join Date
    Jan 2002
    Location
    Essex meets
    Posts
    6,159
    Rides
    0
    Immobiliser relay knackered?

  8. #8
    Guest
    Join Date
    May 2019
    Location
    Corby
    Posts
    27
    Rides
    0
    I shall check my CAS is positioned correctly, and I’ll check the relay for the immobiliser. Will report back shortly

  9. #9
    Guest
    Join Date
    May 2019
    Location
    Corby
    Posts
    27
    Rides
    0
    I’ve found my problem, the friend who rebuilt my engine, put my Greddy Cam sprockets on the wrong way

  10. #10
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    36,381
    Rides
    1
    Yeah that’ll do it.
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •