-
Guest
SR20 automatic gearbox flexplate and spacer
Wanted: SR20 automatic gearbox flexplate and spacer
Should be from the following models:
Nissan 180SX, KRPS13, RPS13
Nissan 200SX, S14
Nissan Serena, KBC23, KBCC23, KBNC23
Nissan Silvia, CS14, KPS13, PS13, S14, S15
Nissan Vanette Serena, KBC23, KBCC23, KBNC23
Only from rear/4wd models. To my knowledge others don’t fit.
Part numbers:
Flex plate: 1233152F00
Spacer: 1233362J00
Items 1 and 8 from the picture:
C5AB6783-42AB-4D41-8990-724C75A00A67.jpeg
I live in Finland so let me know offers shipped here.
-
Guest
Should have these. Pm me your address and I can get you a price delivered
-
Guest
There was a guy on Facebook gifting all auto bits after a conversion he done, might be worth a look?
Sent from my iPad using Tapatalk
-
Guest
Joshua129: Cool, pm’d
King: whereabouts was this?
-
Guest
-
Guest
-
Guest
-
Guest
Any offers?
The other offers seem to have fallen through.
-
Guest
In dire need for these still.
Let me know if you have these!
-
Guest
Still looking. Let me know if you have these.
Even only the flexplate would be enough!
-
Guest
Still looking. Offers please
-
Guest
Be doing a manual conversion on a 60k car soon. Will have all auto parts available
-
Guest
I have an S14 auto box in good nick with torque converter and I believe the gearbox flexplate as well. Will check the garage tomorrow.
All cables intact and with plugs in place*. Was going to use it with a bellhousing swap on my S13 CA but have since sourced a good low mileage original S13 auto box for a straight swap off / on.
PM me if interested in it.
PS. Also got an S15 auto box and torque converter available in good nick too. Surplus to requirements as not compatible with S13 even with bellhousing swap, four bolt torque converter and different spline size and count.... Open to offers if anyone wants an S15 auto box. PM me please...
* if anyone is doing an auto to manual swap then don't just cut the wiring and connectors, as it goes from being useable and worth something to being a large paperweight or doorstop.
Last edited by Rochester; 17-06-2019 at 20:47.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules