Results 1 to 13 of 13

Thread: SR20 automatic gearbox flexplate and spacer

  1. #1
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0

    SR20 automatic gearbox flexplate and spacer

    Wanted: SR20 automatic gearbox flexplate and spacer

    Should be from the following models:
    Nissan 180SX, KRPS13, RPS13
    Nissan 200SX, S14
    Nissan Serena, KBC23, KBCC23, KBNC23
    Nissan Silvia, CS14, KPS13, PS13, S14, S15
    Nissan Vanette Serena, KBC23, KBCC23, KBNC23

    Only from rear/4wd models. To my knowledge others don’t fit.

    Part numbers:
    Flex plate: 1233152F00
    Spacer: 1233362J00

    Items 1 and 8 from the picture:
    C5AB6783-42AB-4D41-8990-724C75A00A67.jpeg

    I live in Finland so let me know offers shipped here.

  2. #2
    Guest
    Join Date
    Feb 2015
    Location
    Earth
    Posts
    64
    Rides
    0
    Should have these. Pm me your address and I can get you a price delivered

  3. #3
    Guest
    Join Date
    Feb 2015
    Location
    Benfleet essex
    Posts
    1,123
    Rides
    0
    There was a guy on Facebook gifting all auto bits after a conversion he done, might be worth a look?


    Sent from my iPad using Tapatalk

  4. #4
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    Joshua129: Cool, pm’d
    King: whereabouts was this?

  5. #5
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    Still looking for these.

  6. #6
    Guest
    Join Date
    Aug 2012
    Location
    Belgium
    Posts
    78
    Rides
    0
    i have these , pm me

  7. #7
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    Still looking for these

  8. #8
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    Any offers?
    The other offers seem to have fallen through.

  9. #9
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    In dire need for these still.
    Let me know if you have these!

  10. #10
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    Still looking. Let me know if you have these.
    Even only the flexplate would be enough!

  11. #11
    Guest Teppo's Avatar
    Join Date
    Dec 2006
    Location
    Finland
    Posts
    12
    Rides
    0
    Still looking. Offers please

  12. #12
    Guest
    Join Date
    Aug 2012
    Location
    Essex
    Posts
    8
    Rides
    0
    Be doing a manual conversion on a 60k car soon. Will have all auto parts available

  13. #13
    Guest Rochester's Avatar
    Join Date
    Sep 2007
    Location
    Nr. Guildford
    Posts
    2,481
    Rides
    0
    I have an S14 auto box in good nick with torque converter and I believe the gearbox flexplate as well. Will check the garage tomorrow.

    All cables intact and with plugs in place*. Was going to use it with a bellhousing swap on my S13 CA but have since sourced a good low mileage original S13 auto box for a straight swap off / on.

    PM me if interested in it.

    PS. Also got an S15 auto box and torque converter available in good nick too. Surplus to requirements as not compatible with S13 even with bellhousing swap, four bolt torque converter and different spline size and count.... Open to offers if anyone wants an S15 auto box. PM me please...

    * if anyone is doing an auto to manual swap then don't just cut the wiring and connectors, as it goes from being useable and worth something to being a large paperweight or doorstop.
    Last edited by Rochester; 17-06-2019 at 20:47.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •