-
Guest
Anyone else fitted an R35 maf?
Fitted mine last week to replace an ageing Z32 and help with decel air and so far it's looking good.
I've got 15 odd percent added to the SAFC and removed decel air setting completely which has made it idle nicer and fingers crossed will mean I won't need to have them.there at all
Apparantly they are way less susceptible to turbulence etc
-
Guest
did you put it in the intake side?
I was tempted to convert to one of these but put it in the cold side intercooler pipe
-
Guest
Mines in the same place as standard but I did consider the cold side of my intercooler as they are supposedly good for suck through and blow through
-
Guest
I have an HPX slot style maf in the cold side of my cooler pipe, no problems so far
Sent from my iPhone using Tapatalk
-
Guest
You are running this MAF on a stock ECU with just an SAFC II to sort things out?
-
Guest
I’m using a Nistune ecu just
Sent from my iPhone using Tapatalk
-
Guest
the reason im kicking myself about not fitting one is now sometime my engine stalls when I lift off throttle sharply. usually when doing wild backwards entries. that's with a z32 and some fairly bendy pipework
-
Guest
Mine mapped for a Z32 and trimmed from there for an R35.
The stalling was a primary reason for the swap. The SAFC is ok for sorting it but not ideal.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules