Results 1 to 3 of 3

Thread: Sr20det crank pulley/chain advice

  1. #1
    Guest
    Join Date
    Jan 2018
    Location
    Kent
    Posts
    14
    Rides
    0

    Sr20det crank pulley/chain advice

    After a little advice upon rebuilding my forged sr20det i found the crank pully/ chain oil squirter in my sump and the oil way snapped ive had it welded back up but struggling to re fit the squirter, is it nessary to have? Or will the flow of oil out the oil way be enough?
    If not do i need to heat it to insert it or does the oil pump cover hold it in place? Thanks in advance

  2. #2
    Guest speedingmofa's Avatar
    Join Date
    Nov 2012
    Location
    Rotterdam, the Netherlands
    Posts
    555
    Rides
    0
    The OEM chain squirter usually isn't held by the oil pump cover. If it's popped out, pop it back in with sealant or so so it doesn't pop back out with pressure. Leaving it out leaves a big hole in the oil passage and your oil pressure will drop significantly.

  3. #3
    Guest
    Join Date
    Jan 2018
    Location
    Kent
    Posts
    14
    Rides
    0
    Ok thanks would u recomend something like locktite bearing fit or regular sealent

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •