Please note, all items have been in my garage for a while so are dusty/have some surface rust. All fully working.
HSD DualTech Coilovers, S14 fitment. All threads free (greased and taped from new) no knocks, bangs, leaks etc. Pillowball bearings still nice and tight. Fitted with 9kg/7kg springs, have a pair of 5kg springs they’ll come with, a pair of rear bottom brackets, and brand new lower polybushes. -SOLD
Z32 rear brake setup, Calipers, discs, braided lines, full handbrake assembly. SOLD
5-stud hubs. Rear bearings almost brand new, front bearings very good. £150 FRONTS SOLD, REARS-£60
HKS Hi Power Cat-back. S14. Centre box removed, tubing painted in high temp black and wrapped where it passes fuel tank. Scraped on the bottom of the backbox. No holes or blows. - £160
Competition clutch stage 4 Paddle. SR20. Almost new, done less than 5 miles and never seen boost (was running engine in) - £280 or £400 with lightweight flywheel included.
Lightweight SR20 XTD flywheel, has just been skimmed and balanced, less than 5miles use with above clutch. Improves the response of an SR massively! Includes ARP Flywheel bolts – £150
Driftworks Geomaster 2 front knuckles. Make a lowered sbody drive unbelievably well. - SOLD
Nismo 4.1 2-way rear diff with skyline 5x1 shafts. In s14/skyline pumpkin. Works perfectly. - £600
Hardrace rubber bushed rear arm set. Traction, toe, and camber. Will ensure everything is free before sale. - £300
DMAX sytle S14 rear boot spoiler. Couple of chips, easy fix. SOLD
Japspeed front adjustable lower arms. S14. Joints still good (were greased and had uprated dust boots fitted from new) need a lick of paint. - £100
Japspeed superlock kinked tension rods. Very strong and heavy duty. Joints still good (were greased and had uprated dust boots fitted from new) need a lick of paint. - £80
S14 Full ABS delete kit with Hydro fittings. SOLD
Turbosmart Fuel Pressure Regulator. Genuine with liquid filled gauge. SOLD
Almost brand new SR20 alternator. £100
SR20 starter motor, works perfectly. Holes drilled out for box conversion plate, so would need nut and bolting. SOLD
25mm 5x114 spacers. £50
30mm 5x114 spacers. £55
Polybushed S14 tension rods. £30
Z32 BM-57 Brake Master Cylinder. 2-port. SOLD
Rear Driftworks S14 braided lines. Brand new. £20
Happy to listen to offers on all this
Collection from Maidstone, Kent or can post for cost.
Pics to follow.