Results 1 to 14 of 14

Thread: Breaking big spec S14a - Work wheels, Link ECU, Forged RB25, Caged and tubbed shell

  1. #1
    Guest
    Join Date
    Jan 2012
    Location
    surrey
    Posts
    228
    Rides
    0

    Breaking big spec S14a - Work wheels, Link ECU, Forged RB25, Caged and tubbed shell

    Breaking Rb25det s14a, due to lack of use I want to move on from S bodys to something newer. A good number of parts on the car are as near as makes no difference new. Happy to do a deal on multiple parts together/rolling shell etc.

    Spec list and prices below:

    Fully forged rebuilt rb25det engine. Wiesco pistons, manley rods, collared crank, n1 oil pump, bottom end fully balanced, arp head studs and main end studs, cosworth headgasket, ACL bearings, supertech valve stems, stock head rebuilt, valve seats done etc. Cam covers powdercoated with AN fittings welded on £provisinally sold pending payment
    Freddy inlet, powdercoated grey to match the cam covers prov sold
    Genuine Q45 90mm throttlebody prov sold
    Lightweight flywheel prov sold
    Exedy organic clutch £100
    Datchwerx 740cc side feed injectors in stock rb25det rail prov sold
    Splitfire coilpacks rb25det S2 prov sold
    IHI vc24 turbo, cheapo spec manifold, oil lines, custom downpipe, tial 38mm wastegate with screamer. Basically a bolt on 425bhp setup £500
    Rb25det gearbox £800
    Rb25 s14 one piece prop prov sold
    Rb25 s14 gearbox crossmember with mount prov sold
    Genuine bride zeta 2 seat, good condition sold
    Genuine Bride Zeta 1, rip in the side bolster been patched and seat cushion has been replaced at some stage with foam trimmed in black material, not the best but comfortable enough. Has the bride headrest thing - £150
    Driftworks superlow seat rails for S13/S14/S15 - sold
    Driftworks hydraulic handbrake with long handle, wildwood cylinder and braided lines £100
    Braille b2015 gel battery and Braille battery cage £150
    Genuine nardi deep corn steering wheel, perforated leather - sold
    Sparco snap off steering boss £60
    S14 steering wheel boss £40
    Vertex bodykit, paints chipped and scrateched but no holes or cracks - prov sold
    50mm rear fenders, as new just been painted. Drilled for rivet/riv-nut £100
    EPracing 45mm front fenders - sold
    Kouki headlights all brackets good - prov sold
    HID kit £30
    JDM kouki grill, genuine Nissan item from Japan -sold
    Kouki clear indicators - prov sold
    Clear sidelights £20
    JDM kouki spoiler on bootlid, Genuine Nissan item not a cheapy fibreglass knockoff - sold
    R33 4.1 diff with 5 bolt shaft and solid bushes -sold
    K-sport 358mm 8 piston fromt brakes £600
    Z32 brake Master cylinder - sold
    S14 stock rear brakes with brand new pads and rotors £80
    Shell, front tubs for extra lock, rear arches cut out for over fenders, ski hatch firewalled off, full cage with harness bar, crossed doorbars, braced pillars etc. All glass, doors, bonnet, bootlid, Roof spoiler etc. Can do a deal with the coilovers and knuckles, or fit stock arms if you bring coilovers and wheels. Shell has 11 months MOT on it if you’re looking to put it back on the road. - prov sold
    Geomaster 2 front knuckles - sold
    Geomaster 1 rear knuckles £200
    Japspeed superlock front tension rods as new £80
    Tien tie rods and ends £50
    Driftworks rack spacers - sold
    Japspeed rear camber arms as new £60
    Japspeed rear traction arms as new - sold
    Japspeed rear toe arms £60
    Cusco front K framr brace £60
    BC ER remote resorvior coilovers, rears have been modified to work with the Geomasters - sopd
    R33 front subframe powdercoated - prov sold
    Walbro 255 in tank pump nearly new £50
    AEM 020LPH inline fuel pump nearly new £100
    Swirl pot £50
    Work VSXX wheels, 18x10.5 ET-3 front and 18x12 ET0 rear, basically new with new federal 595 RSR tires £2000
    Greddy oil cooler and filter relocation kit, cooler core near new - sold
    Apex intercooler core £50
    Genuine DMAX LED rear lights imported from Japan - sold
    Takata harnesses, I think there fakes TBH. - sold
    Japspeed S13 radiator with SPAL electric fan £80
    Link G4 plugin ecu with Inlet temp sensor and boost control solenoid - sold
    AEM analog wideband sensor £100
    AEM analog oil pressure sensor £70
    AEM analog oil temperature sensor £70
    AEM adjustable fuel pressure regulator with Gauge, nearly new £100
    Phormula KS-4 knock monitor, nearly new £250
    RB25DET S14 engine and gearbox loom £200
    AN10 catch tank and lines - prov sold
    Exhaust, can’t remember what brand it Is but its 3 inch all the way through with a mid silencer. Pretty subtle £100
    Custom radiator expansion tank/washer bottle to fit with Tubbed arches £20
    Custom radiator expansion tank £20


    Spares
    RB25 engine in pieces, 12 pistons and rods. Head shows det marks is missing some of the valves and followers etc £100
    S14 touring skirts with end caps £60
    2x rb25 inlets with throttlebodys £50 each
    Spal fan £20

























    Last edited by wicked-vtr; 28-10-2018 at 22:20.

  2. #2
    Guest JuicyCarbonFX's Avatar
    Join Date
    Jun 2015
    Location
    Lincoln
    Posts
    290
    Rides
    0
    If you willing to post il take the rear Dmax lights off you.

  3. #3
    Guest
    Join Date
    Dec 2010
    Location
    Tenerife
    Posts
    62
    Rides
    0
    Are you still having the Walbro 255 in tank pump? Pm´d btw

  4. #4
    Dorset & Hants Rep pointz's Avatar
    Join Date
    Sep 2009
    Location
    southampton
    Posts
    7,899
    Rides
    0
    How much for the aem pump, for and swirl pot? Any pic?

  5. #5
    Guest
    Join Date
    Jan 2012
    Location
    surrey
    Posts
    228
    Rides
    0
    Dmax gone pending collection. Pm'd regarding pumps

  6. #6
    Guest
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    302
    Rides
    0
    PM about the following parts:
    Kouki headlights, grill, indicators, sidelights, spoiler.

  7. #7
    Guest mattvaughan180's Avatar
    Join Date
    Nov 2008
    Location
    Tewkesbury
    Posts
    219
    Rides
    0
    PM’d you


    Sent from my iPhone using Tapatalk

  8. #8
    Guest
    Join Date
    Oct 2018
    Location
    New York New York
    Posts
    2
    Rides
    0
    do you have the speedo?

  9. #9
    Guest
    Join Date
    Jan 2012
    Location
    surrey
    Posts
    228
    Rides
    0
    Updated add and replied to pms

  10. #10
    Guest
    Join Date
    Jun 2017
    Location
    Essex
    Posts
    22
    Rides
    0
    Are the stock rear brakes still available at all??


    Sent from my iPhone using Tapatalk

  11. #11
    Guest mr_pea's Avatar
    Join Date
    Aug 2013
    Location
    Naaaarrrch
    Posts
    616
    Rides
    0
    Is the Bride Zeta 1 still available and do you have any other pics please?
    Thank you

    Sent from my SM-G960F using Tapatalk

  12. #12
    living on the edge p.nicholas's Avatar
    Join Date
    Jan 2002
    Location
    Essex meets
    Posts
    6,174
    Rides
    0
    Pm sent

  13. #13
    Guest jayspolishings's Avatar
    Join Date
    Jan 2019
    Location
    Notwich
    Posts
    24
    Rides
    0
    Rolling shell price please. Don’t need the fancy wheels.

  14. #14
    Guest
    Join Date
    May 2016
    Location
    london
    Posts
    290
    Rides
    0
    Do you have driver side a pillar trim by any chance?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •