Hello!
I've started the long job of building up my resto project s14 from a bare shell.
Looking at the wiring loom, there's a few wires spliced in that can't be OEM - they're joining the front behind the dash section, and the drivers side section together (And one has bare exposed solder, so not Nissan!)
I've done a bit of tracing back on the wires, we'll start with one that's been soldered onto a cable coming out of the big connector block at the front of the drivers side section - the wire it's spliced into goes to the open/close switch on the drivers door. The other way, the soldered in wire goes to a pin on the nats box.
Next wire goes all the way to the back of the car, to a plug which seems to be for the boot light (?!) That one also traces back the other way to the NATS box.
Anyone seen this before, or better yet, anyone got a standard NATS system wiring diagram so I can see what -should- be going on?
The 2 ones pictured are the ones I'm interested in for now!
Cheers!
Sent from my SM-G960F using Tapatalk