Is the 2870r still the one to go for if you go stage 3 or is there a new all singing all dancing equivalent?
Sent from my SM-G960F using Tapatalk
Is the 2870r still the one to go for if you go stage 3 or is there a new all singing all dancing equivalent?
Sent from my SM-G960F using Tapatalk
I got gt2871r on mine it’s good to be honest and does the job well but I’m sure turbo technology has come on since they come out I know people use the Garrett gtx range(don’t ask me the difference) and people go hybrid turbo route,
I know Borg Warner do there efr range and there meant to be the bollox but I haven’t heard of any sr’s running them
Sent from my iPhone using Tapatalk
If you're open to any turbo and a complete custom map etc... You can not go wrong with the new garret turbos on our stuff.
Take a look https://www.garrettmotion.com/racing...ct_Day1Garrett
The size of a t28, with capability to flow 550 bhp.....
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
id be looking at the borgwarner turbos if I was buying new.
7064 or something like that.
The G series turbos will be impressive, but are expensive because of the turbine alloys.
If you want minimum fuss for stage 3 you're stuck with the older GT2871r, but if you're willing to go for a custom map then pick your poison.
I'd probably follow green's logic and look at BW. 7163 is a bit of a monster on an SR, easy 425hp and will get you 420lb-ft by 3500rpm. It's a belter of an all rounder, just expensive to get setup with due to manifolds etc. A full race jobby will set you back nearly $4000 plus taxes and shipping!
7163, that's the one I ment. I was saving for one but happened across an absolute deal of a 2871R so reluctantly fitted that.
I was going to go for the T4 flanged internally gated version. I think that APW guy does a manifold that would work.
Jesus i'm going totally old school so Got a Greddy T518Z waiting to go on mine
Has anybody installed and got a map of GTX, new G series or EFR turbo on a stock block sr20?
Last edited by screaminsilvia1; 19-10-2018 at 14:57.
The GTX has been done and I'm sure you'll find the EFR's are well, the G-series hasn't been out for very long yet though.
Here's the new Garrett G25-550 vs GTX3071R series turbo on an SR20. I was thinking about getting this for my Red Top SR20.
https://youtu.be/AYzi_5O_lCI
Last edited by ekjim; 21-10-2018 at 20:54.
maybe look here https://www.garrettmotion.com/boostadviser/
Then take the biggest they recommend
A twin scroll GTX30 would give that result a run for it's money with the right cams in.
So a twin scroll G25 looks like it has potential.
It's funny the comments refer to EFR7163 - they are brilliant but the spool results they refer to are twin scroll! You would see something similar to the GTX30 for response with a mono scroll.
Be careful comparing mono to twin scroll results and across different frame sizes. A larger turbine but twin scroll could still be better for low end than a smaller turbo. It totally depends on the efficiency stack up between the turbine and the compressor as well as the wheel inertia.
Does Monkey London run a Garrett gtx2867r on his s15 , I think that car looks like it goes really well and I think that's 400bhp. Anyone got more spec on his engine setup ?