Hi, ive spent 2 hours searching through the forum/search bar trying to find a diagram of how to fit manual boost controller to a S13 CA18DET.
I keep reading people advising to 'just tee into the small line between the turbo inlet and actuator' - but my T28 doesn't have that. The vacuum line from the actuator goes to a small valve/solenoid on the inner wing, then a line from the inlet hose, and a line from the inlet plenum joins to the same small valve.
Im know that this must have been covered numerous times before, and ive tried my best to find a diagram/information without posting this newbie-esque post, but I cant find the exact info I need anywhere. There were a few promising posts but they are so old that the photos/links don't work anymore. Ive read that the ca18 doesn't have a boost solenoid, but then other posts say that it has, then others say to remove it...?? Im soo confused!
I have all stage 2 mods, (ecu, air filter, exhaust, fuel pump, intercooler, boost gauge etc) so trying to be sensible and getting everything else in order before upping the boost, but im struggling to find exactly where to tee into. Do I just tee into the vacuum line between the actuator and the small valve/solenoid, job done??? Do I remove the small valve/solenoid altogether and do some thing else?? A simple diagram/photo would help me out so much.
Id appreciate any help, or even a link to an existing post that I may have missed. Thanks,
Lee