Is it possible to use something like this? Or is burning them the only option?
https://rover.ebay.com/rover/0/0/0?m...2F263685601511
Sent from my SM-G960F using Tapatalk
Is it possible to use something like this? Or is burning them the only option?
https://rover.ebay.com/rover/0/0/0?m...2F263685601511
Sent from my SM-G960F using Tapatalk
I would imagine they will be pretty solid in there by now. Burning them out is easy, I'm assuming you're wanting to avoid removing the subframe?
Saw around the centre of the bush the burn them out, or just burn them out with a proper blow torch. Did all four of mine within an hour that way
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
I have the Subframe out of the car. Problem is that my neighbours are tw4ts! How long do they take to burn?
Do they create a lot of smoke and smell?
Sent from my SM-G960F using Tapatalk
I'm my experience yes they take a long time to burn but mine we still rubbery. I used a blade saw thing and cut mine out in the end. Petrol and a blow touch both ineffective for mine.
Edit - also yes quite smelly and smokey
my mate swears by pressing them out.
he is older than gods dog so must be onto something.
I used something like this https://www.ebay.co.uk/itm/SHARP-JAB...kAAOSwRgJXilgr
Sawzall makes light work of them
2nd the sawzall, tried burning method= not great and makes a mess.
Does it have to be a Milwaukee? Or any reciprocating saw?
Sent from my SM-G960F using Tapatalk
Depends if you wanna be flash or not lol I have a small 10.8v metabo one and it’s great
knife, blow torch and a hack saw
depends on what bush you buy to replace them with I think , I had energy suspension ones and had to leave some of the sleeves in place...
I bought some and had to remove the sleeves and used the recip saw for that as well
the ones I fitted had to remove the sleeves.hack saw a notch, chisel in behind and hit with a hammer.they bend out then