Page 5 of 5 FirstFirst ... 345
Results 81 to 83 of 83

Thread: The road to competition in my s14a drift car

  1. #81
    Guest
    Join Date
    Jan 2014
    Location
    Devon
    Posts
    272
    Rides
    0
    Also took the bonnet off ready to fit the second vent i've been meaning to fit for ages!

    Lockdown at home by Daniel Collins, on Flickr

    Good time whilst the bonnet is off to make the cut-off switch pull brackets and cut the scuttle panel to fit around it. (these are now part of the regs for RDC etc)

    Lockdown at home by Daniel Collins, on Flickr

    Needs welding all the way around, only tacked it in as ran out of mig wire...

    Lockdown at home by Daniel Collins, on Flickr

    scuttle panel cut to fit

    Lockdown at home by Daniel Collins, on Flickr

  2. #82
    Guest
    Join Date
    Jan 2014
    Location
    Devon
    Posts
    272
    Rides
    0

    ARB bushes and alloy extinguisher lines

    Hadn't touched the car for a few days, been working on the back garden etc with all the nice weather then remembered I still had some poly front ARB link bushes on the shelf, whipped the wheels off again and swapped the bushes over, still got the bonnet off to do the second vent so that will be the next job.

    Front ARB link bushes by Daniel Collins, on Flickr

    Front ARB link bushes by Daniel Collins, on Flickr

    Front ARB link bushes by Daniel Collins, on Flickr

    I also got most of the alloy extinguisher lines in, just need to cut down the end and fit the last couple nozzles and jobs a good'un.

    Lockdown at home by Daniel Collins, on Flickr

    Lockdown at home by Daniel Collins, on Flickr

    My race gloves turned up too! Decent quality, glad I spent a bit more on branded ones this season.

    Front ARB link bushes by Daniel Collins, on Flickr

  3. #83
    Guest
    Join Date
    Jan 2014
    Location
    Devon
    Posts
    272
    Rides
    0
    Overdue an update! Done some welding to the inner wheel arch on the passenger side, finished up the cut offs, replaced a blowing wastegate gasket, fitted a turbo blanket plus more!

    I have started video logging my track bike and the s14 drift car so here's a walk around of it including the first start up in about 6 months!

    Please give it a like and subscribe as it helps with the sponsors etc. I need to improve for sure but this is quite a new thing to me. All comments and critics welcome

    Last edited by drc; 02-07-2020 at 19:45.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •