Results 1 to 4 of 4

Thread: ca18det problem after stage 3

  1. #1
    Guest tougetoshi's Avatar
    Join Date
    Sep 2018
    Location
    Sweden
    Posts
    4
    Rides
    0

    ca18det problem after stage 3

    Hi Guys, just joined the community.

    So i have a 200sx ca18det and after going through a stage 3 install the car goes uneven and dies if i don't rev (also goes uneven when i rev).

    the car runs fine when it's cold but when it get's warm, the problem appears.

    My setup: gt28, Walbro 255lph, stainless header to 3" exhaust, stage 3 ecu, z32lmm with cone filter.

    I'm running stock injectors right now, could that be the problem?

    Best Regards,
    Toshi

  2. #2
    Guest jay1017's Avatar
    Join Date
    Dec 2016
    Location
    Dudley
    Posts
    530
    Rides
    0
    Quote Originally Posted by tougetoshi View Post
    Hi Guys, just joined the community.

    So i have a 200sx ca18det and after going through a stage 3 install the car goes uneven and dies if i don't rev (also goes uneven when i rev).

    the car runs fine when it's cold but when it get's warm, the problem appears.

    My setup: gt28, Walbro 255lph, stainless header to 3" exhaust, stage 3 ecu, z32lmm with cone filter.

    I'm running stock injectors right now, could that be the problem?

    Best Regards,
    Toshi
    Stage 3 requires 444 injectors.

    No surprise your car stalls.


    Sent from my iPhone using Tapatalk

  3. #3
    Guest
    Join Date
    Feb 2004
    Location
    Burton on Trent
    Posts
    11,209
    Rides
    0
    Stage 3 needs 440cc injectors AND a front or rad mount intercooler (Volvo/SAAB).

    Until you get them. Swap the airflow meter out and put the stock chip back. Keep boost below 12psi and 10psi may be safer.

  4. #4
    Guest tougetoshi's Avatar
    Join Date
    Sep 2018
    Location
    Sweden
    Posts
    4
    Rides
    0
    Thank you for the quick reply guys.

    /Toshi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •