So all the welding is done on my car now, and it’s passed the mot... it’s officially saved! *hooray*
So basically for those who don’t know I’ve dragged this car out of a garage where it sat for a few years, I was told it had stiff 1st 2nd and reverse before I bought it, but the guy said it wasn’t like this when he first parked it up. So I’ve got it out the garage now and had a little drive, basically won’t go in reverse unless you turn the car off and start in reverse, but then you can almost feel the car trying to move backward, and also first is extremely stiff and second isn’t as bad but still not good, I have no idea what clutch but I’m guessing it’s some kind of paddle clutch as it’s extremely hard to press down and engages very low down, as in I only have to lift the clutch peddle an inch for the clutch to fully engage.
So I’m wondering if there is anything I can try, check or do to maybe fix this issue or even make it a little better so I can drive it... Thanks in advance, here’s a picture
Sent from my iPhone using Tapatalk