Results 1 to 9 of 9

Thread: Godspeed ARB replacement bushes

  1. #1
    Guest JackB's Avatar
    Join Date
    Sep 2015
    Location
    St. Albans
    Posts
    447
    Rides
    0

    Godspeed ARB replacement bushes

    Will anywhere supply new anti roll bar main bushes for some godspeed bars I've got?

    I'd rather get the exact replacements that fit as they should for an s13 than some generic ones. Unless someone can recommend bushes from somewhere else that'll fit perfectly.

    Front is 30mm and rear is 28mm.

  2. #2
    Member sx rider's Avatar
    Join Date
    Apr 2008
    Location
    West Sussex
    Posts
    2,759
    Rides
    0
    have a look here, I asked the same not that long ago http://sxoc.com/vbb/showthread.php?5...hes&highlight=

  3. #3
    Guest JackB's Avatar
    Join Date
    Sep 2015
    Location
    St. Albans
    Posts
    447
    Rides
    0
    Quote Originally Posted by sx rider View Post
    have a look here, I asked the same not that long ago http://sxoc.com/vbb/showthread.php?5...hes&highlight=
    Thanks, unfortunately all that's there is the drop link bushes. I've got some good poly drop links so it's just the main bushes that mount the bar to the car I'm after.

  4. #4
    Member R3K1355's Avatar
    Join Date
    Nov 2006
    Location
    Yorkshire
    Posts
    12,054
    Rides
    0
    You're assuming that the original bushes were not generics to start off with??
    30mm rear ARB bush - something from an R32 GTR Skyline should fit?

    What are the mounts like (if its not a silly question)

  5. #5
    Guest JackB's Avatar
    Join Date
    Sep 2015
    Location
    St. Albans
    Posts
    447
    Rides
    0
    Quote Originally Posted by R3K1355 View Post
    You're assuming that the original bushes were not generics to start off with??
    30mm rear ARB bush - something from an R32 GTR Skyline should fit?

    What are the mounts like (if its not a silly question)
    I'll get some pics up tomorrow to show what I've got, will be much easier

  6. #6
    Guest
    Join Date
    Jul 2011
    Location
    wirral
    Posts
    689
    Rides
    0
    keen to fins some to, mine are shot on my s14a

  7. #7
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,441
    Rides
    0
    The front ones are available on eBay. Well theyíre 29mm but will fit. Iím sure I used these

    https://rover.ebay.com/rover/0/0/0?m...2F232577287524


    Iím struggling to find a solution for the rear without buying a whole new mount. They sell plenty of 28mm bushes but nothing with the right dimensions to fit in the OEM console.

    Something like this:

    https://rover.ebay.com/rover/0/0/0?m...2F332464037104

  8. #8
    Guest JackB's Avatar
    Join Date
    Sep 2015
    Location
    St. Albans
    Posts
    447
    Rides
    0
    Quote Originally Posted by Sean-B View Post
    The front ones are available on eBay. Well they’re 29mm but will fit. I’m sure I used these

    https://rover.ebay.com/rover/0/0/0?m...2F232577287524


    I’m struggling to find a solution for the rear without buying a whole new mount. They sell plenty of 28mm bushes but nothing with the right dimensions to fit in the OEM console.

    Something like this:

    https://rover.ebay.com/rover/0/0/0?m...2F332464037104
    Those fronts look like they could work with a little trimming to that buldged bit on the edges.

    The rear I'm not sure whether is want to run or not, probably would be fine.

    However, I emailed strongflex yesterday and they said they can make bushes to custom sizes. So if I order polybushes for an s13, I can put in the notes the diameter required and they will make it. I will likely go with that option and post on here what I end up getting delivered and if it fits etc..

    Thanks for the input guys. I couldn't really find much online on replacement bushes so if this option works then it'll be ideal for others to know about and find out.

  9. #9
    Member
    Join Date
    Feb 2009
    Location
    Finland
    Posts
    1,985
    Rides
    0
    Godspeed still makes the ARBs so maybe ask the directly?
    AT-R website opened! Visit: AT-R


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •