Results 1 to 8 of 8

Thread: oil cooler help

  1. #1
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0

    oil cooler help

    I am trying to figure out my options for the oil cooler/ sandwich plate..

    the current setup I have goes from engine, to housing, to cooler, back to engine... this is no good as my oil does not get warm enough so I need to have a thermostat housing.

    so, the current remote housing I have, will a sandwich plate on that going to the cooler work? (I have done a diagram)


    oil cooler help.png

  2. #2
    Guest
    Join Date
    Oct 2014
    Location
    Leicester
    Posts
    1,491
    Rides
    0
    I’ve got one of the relocation plates to move the filter with a plate that removes the factory oil cooler/warmer and a mocal in-line thermostat all done in 5/8” or 16mm hose with the push lock hose tails

    Works fine apart from the oil takes longer to warm up by a small amount as the thermostat still circulates some oil through the cooler even at cold

  3. #3
    Guest
    Join Date
    Oct 2014
    Location
    Leicester
    Posts
    1,491
    Rides
    0

  4. #4
    Guest BLAKTOOTH's Avatar
    Join Date
    Jul 2007
    Location
    Benfleet, Essex
    Posts
    4,783
    Rides
    0
    Your options are fit an inline thermo or a thermo sandwich plate and filter blanking cap. I'd probably go with the inline for system simplicity. I've run with multiple sandwich plates for years without issue though so it's a viable option just not necessarily the neatest.

  5. #5
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0
    Think I’ve just found what I’m looking for




    Sent from my iPhone using Tapatalk Pro

  6. #6
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0
    Or this one




    Sent from my iPhone using Tapatalk Pro

  7. #7
    I <3 BBS LM Actual_Ben_Taylor's Avatar
    Join Date
    May 2001
    Location
    South East
    Posts
    23,662
    Rides
    0
    That autobahn88 one looks good, add an oil block and you laughing:


  8. #8
    Guest
    Join Date
    Oct 2014
    Location
    Leicester
    Posts
    1,491
    Rides
    0
    https://h-tune.co.uk/media/catalog/p...tion-kit-1.jpg


    And one of these but just use the filter half

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •