-
Guest
Advice: Boost controller
I have a '94 S14 SR20DET, Zenki model.
I'm completing a stage 1 managed by a MINE'S control unit that allows me to raise the turbo pressure through a boost controller.
this is a temporary solution because subsequently I have to mount the following components to get to a stage 1.5: PowerFc + integrated boost controller + solenoide valve + PowerFc controller + nismo 555 + z32 flow meter and other components...
I would like to buy a boost controller now, for stage 1 set up:
I am undecided between the following 2
-GFB (Go Fast Bits) G-Force III Electronic Boost Controller
-GREDDY profec B Spec II
Do you have any advice?
do you recommend other boost controllers?
THANK YOU
Last edited by devilchris; 13-03-2018 at 21:08.
-
Guest
I'm using a Gizzmo MSIBC v3. I found it really easy to setup and its really small, so it doesn't take up too much space on the dash. It's got a decent amount of features too and was super easy to wire in. It's also a bit cheaper than the others you've listed there.
-
Guest
I've got one of these. Seems to do everything that my old GReddy Profec B Spec II did before it stopped working. And it's a fraction of the price.
https://ldperformance.co.uk/product/...st-controller/
-
Guest
hey , I have had experience with both the profec b spec II and the GFB g force II , both very good bits of kit , i prefered the profec simply for size , but i like the fact you can change the display colours on the GFB, but all said and done they all do the same job ,hope this helps
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules