-
Guest
Setting up Greddy PRofec B-spec 2 boost controller
I've installed the above boost controller but I'm having trouble setting it up. First i can't change the units from KPa to PSI. Manual says hold select for 2 seconds then within 2 seconds double press MODE but nothing changes.
Sent from my LG-H850 using Tapatalk
-
Guest
There is a guide in the useful threads section where ever that is nowadays. I’ve used one for years, but never changed it to psi.
Sent from my iPhone using Tapatalk
-
Guest
I'll have a look. I know how to change it but obviously not getting the procedure right. Would just be helpful to have it reading psi instead of kpa then having to work it out
Sent from my LG-H850 using Tapatalk
-
Guest
It doesn't read PSI IIRC?
You get another unit thats the same as PSI but I don't remember it actually saying PSI
-
I <3 BBS LM
At OFF mode, hold down SELECT button, and within 2 sec. press the MODE button 2 times.
-
Guest
Tried that mate won't do anything
Sent from my LG-H850 using Tapatalk
-
Guest
Mine's in bits at the moment otherwise I'd try it
-
Guest
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules