Page 2 of 2 FirstFirst 12
Results 21 to 31 of 31

Thread: Gtx3076r v gtx3071r

  1. #21
    Guest BWanderers's Avatar
    Join Date
    Sep 2008
    Location
    Watfor(d), but now temp in Stutton, Zuffuk..., then temp in Armitage (Bog centre of the world)... then FINNNALY to Quarry Bonk, Brum!! puff puff.
    Posts
    1,756
    Rides
    0
    Quote Originally Posted by Actual_Ben_Taylor View Post
    I run a Tial 44mm wastegate, GTX3071R and 1000cc injectors.

    I previously had the Sard 850s, but had to swap them out as they were maxed out at 485hp
    Another vote for Ben's route, & this set up was jointly chosen by Greg & Superclarkey. It's going on a 2.2 stroker set up, Syvecs management, Poncams & usual other bits. Owens fettled the turbo a little, but this is a tried & tested choice, so I feel it's a safe bet.

    R.

  2. #22
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0
    Okay well turbo I am now changing, so that will be sorted, wastegate il have to get sorted and injectors I might leave them for now and see what I get, if its struggling or not good enough il up them to the 1000cc injectors.

    thanks for the help

  3. #23
    Guest immy21's Avatar
    Join Date
    Mar 2009
    Location
    Edinburgh
    Posts
    7,176
    Rides
    0
    I'm curious, which Link G4 ECU do you have and what ECU was suggested?

  4. #24
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0
    Okay...... GTX3071R (gen 2).... fitted!!

    Now going to take the housing tonne drilled for my boost source & then aqua blasted...

    40mm wastegate will be ordered tomorrow




    Sent from my iPhone using Tapatalk Pro

  5. #25
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,467
    Rides
    0
    Fastest response to forum advice I've ever seen!

  6. #26
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0
    Quote Originally Posted by Sean-B View Post
    Fastest response to forum advice I've ever seen!
    To be fair though... they are right lol...

    I just really didn't want to change the turbo

    Having spoke with 4 different tuners they all said the exact same thing as Greg with regards to the turbo, not that it was shit but if it were they the 3071r would be the preferred choice for the power I'm aiming for.




    Sent from my iPhone using Tapatalk Pro

  7. #27
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,467
    Rides
    0
    Quote Originally Posted by dan_evans View Post
    To be fair though... they are right lol...

    I just really didn't want to change the turbo

    Having spoke with 4 different tuners they all said the exact same thing as Greg with regards to the turbo, not that it was shit but if it were they the 3071r would be the preferred choice for the power I'm aiming for.




    Sent from my iPhone using Tapatalk Pro
    Strong work getting hold of the new turbo and swapping it over in such a space of time!

  8. #28
    Guest dan_evans's Avatar
    Join Date
    Oct 2015
    Location
    oswestry, shropshire
    Posts
    440
    Rides
    0
    Quote Originally Posted by Sean-B View Post
    Strong work getting hold of the new turbo and swapping it over in such a space of time!
    Haha thanks mate, Garrett were pretty good to be fair... my work can get pretty much anything.

    Greg advised me that SARD fpr are not the best either.... so guess what's on order..... haha


    Sent from my iPhone using Tapatalk Pro

  9. #29
    Guest speedingmofa's Avatar
    Join Date
    Nov 2012
    Location
    the Netherlands
    Posts
    608
    Rides
    0
    Quote Originally Posted by Actual_Ben_Taylor View Post
    I run a Tial 44mm wastegate, GTX3071R and 1000cc injectors.

    I previously had the Sard 850s, but had to swap them out as they were maxed out at 485hp
    This was at 3bar fuel pressure i suppose? Running them at 4 bar gets you a bit more headroom

    I have DW 810cc, hopefully they'll get me close to 600bhp. Otherwise will need to convert to top feed and 1200cc for a bit more headroom...
    Last edited by speedingmofa; 20-07-2017 at 06:05.

  10. #30
    Guest Drifter's Avatar
    Join Date
    Nov 2003
    Location
    Rural
    Posts
    11,154
    Rides
    0
    I'm pretty much the same as Ben, but I use a smaller tial mvs wastegate


    Sent from my iPhone using Tapatalk

  11. #31
    Guest Skyline boy's Avatar
    Join Date
    Apr 2011
    Location
    Sussex
    Posts
    386
    Rides
    0
    Quote Originally Posted by Actual_Ben_Taylor View Post
    Who said the GTX3076R is shit?


    I have a GTX3071R on my SR22 and I'm pretty happy with it at 520+hp

    Bloody hell that's amazing power! What's the spool up like?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •