Ok so I think I found the culprit. I found a few little leaks but I found a leak in the inlet. Where it splits in half. Also managed to do this
Sent from my SM-G920F using Tapatalk
Smoke pellets seem a bad idea to me, better just to pressure test the system and use a spray bottle with soapy water to see which bits bubble or hiss when the air releases, sticking a smoke pellet in a hose isn't going to pressurise it and more than likely won't escape so you'll just be filling system up with smoke for nothing
Sent from my iPhone using Tapatalk
Hahahaha.. I bought orange smoke pellets. Plan was to run a tube from a jar into the IC system and see if it comes out anywhere.
However I went old school and pressure tested the whole system. Found a leak in the manifold which I have now fixed. However the car won't be going anywhere until I get a new elephant trunk. That was a loud bang lol!!!
Sent from my SM-G920F using Tapatalk
I can take a pic of my setup if you want I think it's a silicon reducer a stainless mandrel bend and a silicon join to the maf
Pretty simple to make and if you block the DV it makes a huge difference to the noise of the choochooos on lift off
Il take one tomorrow but if you want the DV back in you would need a tig welder which makes it not so easy
Ehh who cares it you only live once lol not gunna be that damaging else it would die pretty quickly but people do it for years and I think the s13s didn't even leave the factory with one