Hi all, Has any one had any experience with these?
any problems?
http://www.ebay.co.uk/itm/Silvia-180...UAAOSwGJlZGb7a
Thanks
Hi all, Has any one had any experience with these?
any problems?
http://www.ebay.co.uk/itm/Silvia-180...UAAOSwGJlZGb7a
Thanks
Have you not thought about doing the VAG coilpack conversion?
I run this setup on my SR and have had no issues and I'm my opinion is a worthwhile conversion.
How much we talking ??? I have seen the looms on here, did you make your own loom ?
Just a matter of buying a spare loom if you don't want to modify your own. Some soldering skills, a bit of wire and 4 VAG coil packs which you could get for under 100 quid.Originally Posted by bigjoe
So 200 if you bought another loom, wire, a soldering iron etc.
100 max if you have stuff and use it own loom.
Even if you spend 200 it's a worthwhile investment as the coil packs are reliable, a much better modern design and cost 30 quid or less to replace should they go wrong.
Split fires for example are 140 odd quid each should one fail !!!
Sent from my SM-G920F using Tapatalk
Last edited by CrazySx; 21-05-2017 at 15:30.
Oh and the fact the ones in the link are from China. If they fail then what do you do?
Sent from my SM-G920F using Tapatalk
just done some digging around into the vag conversion, does anyone have a wiring diagram?
Only thing I don't like about the vag conversion is you can't keep the coil pack cover
You can if you use the black shorter coils.
Sent from my SM-G920F using Tapatalk
http://www.sxoc.com/vbb/showthread.php?t=583970
Sent from my SM-G920F using Tapatalk
thanks
Have you actually tried this as I'm quite tempted to go this route if I can keep the coil pack cover
If so do you have a link to the actual coils you used ?
Now your asking something Lol! When I did mine I checked on here and various other forums. Actually there is a guy on here who makes the looms. I am sure it was him who said you can use the black ones. Let me see if I can find the thread.
Sent from my SM-G920F using Tapatalk
I've got one similar to these in the shed from my Mrs old car I might try it on the weekend see if it is long enough to reach the plug
https://www.ebay.co.uk/itm/142389983083
Your link don't work.
Here is the thread I was talking about. This guy makes the looms and clearly has done his homework.
http://www.sxoc.com/vbb/showthread.php?t=591057
Sent from my SM-G920F using Tapatalk
https://www.ebay.co.uk/itm/301118488733
I think the one I have is too short looking at it is it this one you used ?
Something weird is going on with my links il get the item numbers
301118488733 The ones I think I need
131884600127 The one I have
I used these
Sent from my SM-G920F using Tapatalk
VAG loom is so easy to make.
Get the plugs from VEMS
Coils from Awesome GTi
Then wire as so, pin 1-12v, pin 2-Earth, pin3-Signal, pin 4-Earth.
Remove the ignitor, bridging wires (ignore the thick black wire in the connector with 5 wires, just tape it off)
Easy as ****
Well put bud! All the threads make it out to be more complex than it is. The most important bit is getting the wires and pins correct. Everything else is child's play
Just needs a little time and patience.
Sent from my SM-G920F using Tapatalk
Posting Permissions
Reply With Quote
