Results 1 to 6 of 6

Thread: Re-wiring the bay ready for the sr fit

  1. #1
    Guest
    Join Date
    Aug 2016
    Location
    Southend Essex
    Posts
    14
    Rides
    0

    Re-wiring the bay ready for the sr fit

    Hi all, Ive been running my harnesses in the zenki for the first time since owning her .. Ive fitted the ecu, battery harness the lot, I descided to put a battery on & turn to position 2 as thought at least the dash would light up but nothing .. Not a damn thing happened .. Is this correct or am I missing something .. I have a white plug next to the ecu plug which doesnt appear to connect to anything, & Im not sure whats with photobucket atm but hope this link of said plug works ..
    Any help would much appreciated guys

    Hi, I've shared 1 photo via Photobucket. Please click the link to view photos: http://share.photobucket.com/sharepr...hp?id=NjIxMTM=

  2. #2
    Guest Adam-Murse's Avatar
    Join Date
    Jun 2012
    Location
    Teesside
    Posts
    284
    Rides
    0
    that link doesnt work for me

    im not sure what you mean by harness? but....

    that white plug you need... It's known as the F4 plug. it plugs into M60 ifi i remember right and it's all your signal wires etc to your clock pack. the other plugs which enter the car are the big blue one you do up with a 10mm bolt which is for the ECU and if your car has ABS you might have a smaller plug which is white with some yellow on it. Thats not needed for the car to work. You'll also have 2 relays. one is the ECCS relay and basically makes the ECU/coilpacks/injectors work and the other is for the fuel pump

    Plug in your F4 plug and you should be golden

  3. #3
    Guest
    Join Date
    Aug 2016
    Location
    Southend Essex
    Posts
    14
    Rides
    0
    This sounds like the plug Im on about mate but cant see anywhere it plugs to.. the relays are in, the ecu is there & the smaller abs plug is in place.. Where does the f4 plug into? Do you have any pics I can use for reference mate

  4. #4
    Guest
    Join Date
    Aug 2016
    Location
    Southend Essex
    Posts
    14
    Rides
    0

    Re-wiring the bay ready for the sr fit

    This is the plug I need help with, (the bottom pic) I believe its just the abs plug F7, this wont have any effect on the dash or general running will it?
    Thanks for the advice
    http://i.imgur.com/Dt3zxXH.jpg
    Last edited by shelby101; 06-03-2017 at 13:59. Reason: To show the actual plug in question

  5. #5
    Guest
    Join Date
    Aug 2005
    Location
    Ontario, Canada.
    Posts
    44
    Rides
    0
    Quote Originally Posted by shelby101 View Post
    This is the plug I need help with, (the bottom pic) I believe its just the abs plug F7, this wont have any effect on the dash or general running will it?
    Thanks for the advice
    http://i.imgur.com/Dt3zxXH.jpg
    Correct... It is the ABS plug. No effect on dash.

  6. #6
    Guest
    Join Date
    Aug 2016
    Location
    Southend Essex
    Posts
    14
    Rides
    0
    Cheers Jefro240, thats one of many problems dealt with now on to the rest lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •